coney Posted April 30, 2006 Report Share Posted April 30, 2006 I'm wondering if anyone can point me in the right direction, my friends scope on his rimfire sits too far back and too low. Its the furthest forward it can go but he's still finding his head is too far back on the stock for his comfort. I was needing to know if there was a scope mount that could extend and higher his scope and any suggestions for places to go any help much appreciated. Coney Quote Link to comment Share on other sites More sharing options...
Devilishdave Posted April 30, 2006 Report Share Posted April 30, 2006 (edited) I it is already on a high mount then shave some off of the stock as for getting forward I would need to see the mounting rails on the rifle. but you can get ofset rings and bases that can be used for geting a scope much further forwards or back for that matter. Dave Edited April 30, 2006 by Devilishdave Quote Link to comment Share on other sites More sharing options...
mry716 Posted April 30, 2006 Report Share Posted April 30, 2006 It sounds to me as if the stock may be too short. try a slip on pad to see if that helps. if so either leave it on or get a proper job done with a fitted recooil pad or ebonite extension. I have some ebonite if you wish to do it yourselves. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.