Chev Posted September 20, 2009 Report Share Posted September 20, 2009 I've recently noticed some rather strange accurecy problems when out shooting, members have told me about the the grub screws and over tighten the filler cap but that hasent soted the problem I've been out this afternoon trying some 30yd shots with and with out the silencer and both are still in accurate I had my gun on the bipod and aimed for bull and fired 10 shots one after another, the groupin wasent perfect but i didnt get any strays (like its been doin) Then the same without the silencer and still not perfect but no strays Am aiming at bull all the time, one pellet will go just to the rite and slightly up then one next to that then one will go slightly down to the rite then dead right to bull, i'll fill the mag up then they'll start shooting to the left an then it'll seem like am running out of air an start dropping an inch, all within a 2 an half inch circle Then i cleaned the barrel using them felts you can get fired 10 through but still no better Thought it was weird how am not getting any strays but poor grouping then i remembered what dudders7 said about the pellet housing thing on his being lose so once again i filled the mag up and then put the saftey on put the gun over my shoulder and wlked the garden a couple of times (tyring to imitate walking fields) Got down on the bipod first shot was way out to the right about 3inches second was way out 3rd was getting closer to bull an after 5 shots it recentered its self (well as good as it gets) Did that twice an the same thing happened So could it be the pellet housing? or any other suggestions? Cheers guys Quote Link to comment Share on other sites More sharing options...
Heladoxa Posted September 20, 2009 Report Share Posted September 20, 2009 Hiya Chev, Is this before or after gin and tonics? You could sell it to me cheap to get it off your hands. Have you tried different ammo? That's a thought, you're not using .177 in a .22 are you? Lol Bill Quote Link to comment Share on other sites More sharing options...
Chev Posted September 24, 2009 Author Report Share Posted September 24, 2009 Have now found the problem an all it need was the barrel cleaning Job done! Now wheres the gin..... Chev Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.