antlerman

Hi all I have a mix of 52100 steel knife blanks that have been professionaly laser cut and heat treated in sheffield. These are quality blanks however I do not have the time to finish them myself and so I thought I would put them up on here so that they can get finished and so I can get some of the money back that I have invested in these(which I will most likely spend on some more custom knives ). First up is my large hunter model: I have 3 of these that are 185mm long by 30mm wide by 5.8mm thick one has a partial grind on it I would like £18 each for these posted next up is my box cutter blank design these are 163mm long by 20mm wide by 3.8mm thick I have 3 of these and i would like £13 each posted Many thanks Alex

Hi all after taking on a new job I have been left with very little time to make knives and so have come to a point where I have to sell off the last of my stock of materials and projects, they will be going cheap as I would like rid of them as they are taking up too much space. first up is a mixed lot of scales okay moving from top row left to right then onto the bottom row 1. chestnut scales 3/8" x 1 1/2" x 6" 2. rosewood scales 3/8" x 2 1/2" x5" 3. bocote 3/8" x 1 1/2" x 5" 4. zebrawood 3/8" x 1 3/4" x 5" 5.african olivewood 3/8" x 1 1/2" x 6" 6. walnut burl 3/8" x 2" x 5" these are £12 each posted or £60 for the lot next up are part projects that i have left and never completed all are 01 and have been heat treated the first two have black micarta handles and stainless steel fixings they have surface rust but this can be sanded off the next one is sapele with brass fixings and just needs the handle ground and the last is a 01 spoon carving blade that needs sharpening. im looking for £32 for the lot or will consider offers on each NOW SOLD next is a partly done neck knife made from 52100 steel that has been fully heat treated and ground all it needs is the handle shaping - the handle is koata wood which looks lovely im looking for £20 posted for this next is 2 ground and heat treated blades im looking for £23 for both of them posted NOW SOLD and finally is some red deer antler I have left from projects first lot i would like £22 posted second lot i would also like £22 posted many thanks Alex and any questions just drop me a pm

Hi all I have a few bits for sale which i have no time to use. first up are two blades both partially ground they both just need a secondary bevel adding to them. the top one is 4.5mm 01 fully heat treated with a full flat grind the second one down is made from heat treated 52100 and has a sabre grind I would like £40 posted for the pair next up is some antler I have spare : I would like £30 posted for all of the coronets shown above next up is a large selection of deer antler sections I reckon a few kilos worth I would like £45 posted for this lot Many thanks Alex

Hi mate yes that one is yours mate, just drop me a pm. Many thanks Alex

sorry mate that one is sold however the on above it is made from the same redwood burl many thanks Alex Bottom knife blank now sold

hi all due to work commitments i now have very little shed time at the moment and so i am selling some of my knife making kit that im not going to be able to finish. first up is a mixed lot of knives and a blade all made by me from 4mm 52100 which has been laser cut and professionally heat treated starting from the top and moving down 1. small neck knife the whole knife is 143mm long by 23mm wide and the blade is just under 70mm long with a redwood burl handle and brass fittings with a loveless bolt and a leather sheath £30 including postage 2. small neck knife the whole knife is 143mm long by 23mm wide and the blade is just under 70mm long with a koata wood handle and epoxy mixed with brass and brass fittings and a leather sheath £27 including postage 3.small neck knife the whole knife is 143mm long by 23mm wide and the blade is just under 70mm long with a tufnol handle and brass fittings with a loveless bolt with no sheath £20 including postage 4. GPK ( general purpose knife) blade for sale it is fully Heat treated 52100,4mm thick blade 105mm overall 226mm nice size and shape and has a zero scandi grind and has a satin finish on the bevels and has a small swedge. £22 including postage more pics top 2 in this photo if you would like anymore pictures or would like to ask any questions then just drop me a pm many thanks Alex

pm sent Will many thanks Alex

Price drop to £25 posted which is a bargain many thanks Alex

Hi everyone I have 1 of my handmade hunting knives for sale made from 4mm 52100 bearing steel that has been professionaly heat treated, it is around 140mm long and 23mm wide and has a scandi grind. The whole knife is 143mm long by 23mm wide and the blade is just under 70mm long The handle is made from tufnol and has a brass pin and lanyard tube and comes with some paracord. here it is : no sheath with this one im looking for £30 including postage for this one Many thanks Alex

funny you say that mate as I have just drawn up some woodlore style designs and scribed some out on steel ready to do. Many thanks Alex

Thanks mate glad you like them, out of interest what style of knives would you guys on here be interested in ? many thanks Alex

Thanks for the good comments guys and I make most of my knives using the stock removal method, although sometimes I will forge out some blades. Many thanks Alex

yes sorry the whole knife is 143mm long by 23mm wide and the blade is just under 70mm long many thanks Alex

Hi everyone just wanted to show you a few pictures of some knives that I have been making recently these are all 52100 and scandi ground with a mix of hardwood handles top three from the bottom 4 photos are for sale 1 is made from koata wood with brass loveless fixing 2 is redwood and number 3 is redwood burl : A mix of NSK's and sheaths The sheaths made by a top leather worker some handle shots ; All are £45 each including a leather sheath a padded case and recorded postage if interested drop me a pm Many thanks Alex

What's your thoughts on these guys ? Alex

Hi clamps yes I do sell them, drop me a pm if you want anymore information.

Hi everyone just wanted to show you a few pictures of some knives that I have been making recently these are all 52100 and scandi ground with a mix of hardwood handles: A mix of NSK's neck survival knives and sheaths The sheaths ; some handle shots ; and some other projects on the go All comments welcome Alex

Hi everyone I have 2 of my handmade hunting knives for sale made from 4mm 52100 bearing steel that has been professionaly heat treated, they are both around 120mm long and 23mm wide and they both have a scandi grind. First one up made from redwood burl with brass loveless bolt and a brass lanyard tube; comes with a nice handmade leather sheath im looking for £50 posted for this one next up is made with a 2 koatoa wood handle with brass filled epoxy and a brass lanyard tube ; this one also comes with a handmade leather sheath and padded case, however this one has a small glue filled crack shown below so I will take a reduced price of £40 posted for it both come with a case like this one: pm me if you would like to buy one Many thanks Alex

Hi all I have 2 of my NSK (neck survival knife blades for sale, both are from 4mm 52100 and have been professianlly heat treated and both have scandi grinds, both are 143mm long by 22mm wide : photos : 1. has a hand rubbed finish that is semi polished 2. has a rough heat treat finish Iim looking for £25 posted for each of these Many thanks Alex

oak woodie now sold Alex

I also have another NSK finished it is made from 52100 4mm and has been professionally heat treated it has a forge finish on the flats, it has a scandi grind and the handles are made from katalox wood. This was a test piece as I tried filling in the front area with brass chips and epoxy instead of a pin one side is a little off so this knife will be cheaper, it also has a brass lanyard tube. Here are the photographs : im looking for £35 for this with a padded zipped carry case but no sheath. I also have 2 unfinished projects for sale that I started a while ago but have no time to finish. 1. is a woodie clone made from 4mm 01 tool steel with a scandi grind that has been heat treated with oak scales and a brass loveless bolt and a drilled lanyard hole it is 225mm long by 24mm wide Im looking for £25 posted for this SOLD 2. is a general purpose style knife and is made from 3mm thick heat treated steel with a scandi grind, it has sapelle scales and brass pins and is 187mm long by 37mm wide and £15 posted for this This need work doing to them to finish them as they are only part done however they would be perfect for begginers to handle photographs : many thanks Alex

Hi nic sorry the knife is 145mm long by 23mm wide many thanks Alex

Hi all I have one of my NSK's (neck survival knives) for sale the blade is 4mm 52100 and has been professionally heat treated, it has a scandi grind and is semi polished. Th handle is made from walnut and has brass loveless bolt and a brass lanyard tube holding it together. Here are some photographs : Th knife has no sheath but does come in a zipped padded carry case, however you could find someone on this forum to make you a nice sheath. Im looking for £45 in total for the knife including postage many thanks Alex

Hi mate no it doesn't come with a sheath many thanks Alex

Hi all I have a lovely skinning knife that I have recently made for sale it is made from 3mm 01 tool steel and has been professionaly heat treated, it has yew on oneside of the knife and walnut on the other for the handle the knife is 160mm long and 20mm wide. here it is Im looking for £25 for this knife including postage many thanks Alex