aliengravy
-
Posts
181 -
Joined
-
Last visited
Content Type
Profiles
Forums
Calendar
PW Shop
Posts posted by aliengravy
-
-
Hi there,
I am looking for some second hand goose decoys, preferably in Norfolk/Suffolk for collection, but would also pay for delivery.
Thanks.
-
No offence was meant by it, too many people mess around with internet sales, say they'll have things and don't turn up, I can not hold things indefinitely in the hope someone collects.
I was wrong on this occasion. You were genuine. But I would suggest in future you set a solid date and time for collection.
-
No. You told me your mate wanted them, tried to knock me down on price, and then told me he would give me a call.
I heard nothing. Someone come to collect the other 2000 last night, they had the money for everything else, and having not heard from your "mate" for over 24 hours I let him take them.
-
-
17 minutes ago, cookoff013 said:
This link has left me none the wiser?
They're talking about a load thats never been tested?
3 Fed 0.090 Intergral BW 1 1/4 Steel 1,355 Fed 209A Steel Precision Reloading TUPRW123 33 10,500 1/2 inch felt spacer under shot 3 Fed 0.090 Intergral BW 1 1/4 Steel 1,370 Fed 209A Steel Ballistic Products #3221230 33 10,500 1/2 inch felt spacer under shot 3 Fed 0.090 Intergral BW 1 1/4 Steel 1,435 Fed 209A Steel Reloading Specialities 12 ga 3" 37 10,800 1/2 inch felt spacer under shot Alliant have these on their site.
The last one looks interesting/good. But I cant seem to find the "Reloading Specialities 12 ga 3" " wad.....
-
13 minutes ago, cookoff013 said:
Can i also play devils advocate and suggest you find or use data thats 3" 36g of shot.
Of course Cookoff.
Thanks.
Maybe someone could help me with some load data for that?
-
Hi All,
Getting back into some reloading after re-joining the wildfowling club now I have time to get back out again.
I used to use the following
76mm case, 36 grains Alliant Steel, Vagner VP70 wad with 3mm cork, 32g no3 with 3mm cork on the end. 1458fps.
Can I use this load with a BB fill or do I really need to stick to the suggested 3,5mm (#3 shot).
If not does anyone have an Alliant steel 3" (76mm) recipe I could use with BB shot?
-
I have 4000pcs of CX2000 primers for sale. Asking £30 per 1000 Collected.
I have approx 1.5 tubes of Vectan AS powder (one tub is new, one is open). Asking £40 Collected.
Collection only (near Stradbroke in Suffolk) with proof of shotgun certificate.
-
Has anyone got any chokes for a Browning B525 which is fitted with std invector chokes they would sell?
-
I had exactly the same yesterday. Freshly drilled field I could shoot..... well over 200 birds on it.... had only shot there once or twice before so I thought I'd put the birds downwind and see where they returned...none came back and I had sat there a good 45 minutes. I walked over the other side to find them on the stubble next door.. put them up again and they moved further off... in the end I set the decoys up in the sun with a prayer they would return. I only shot 3 birds in 2 hours and they were just unlucky nosey birds.
It appears at the moment you either need to get rope bangers downwind to keep sending the birds back up, or to just not bother going out!
-
Interesting.....
I just found this load data, and wanted to revive this thread:
70mm Case.
CX2000 primer.
17grain Vectan AS
4mm Over Powder Card.
20mm Diana Fibre.
32gm #4 lead shot.
Star crimp.
Its listed as being 940fps (@ 2.5mtr) 402 bar. 5830PSI?
I have been loading a similar load but I use 16 grains of Vectan AS with 28grams of shot.... and have to add a 3mm fibre slice to pad it out.
Is 32 grams with AS not too much?? Has anyone got any experience of this load? or know of its source?
-
Ive had this a few times. Good friends with the garage who do it. They fail it for petty things like this then pass it straight away... Then when vosa come and inspect them they can say they have been doing it! As long as you got a pass straight after I really don't see the problem??
-
I need a stirrup pump for my airgun, does anyone have one to sell?
I live in Suffolk, but I am travelling to Nottingham the weekend if that helps with collection. Failing that I can pay for postage.
PM me if you have one to sell!
-
As title really.... preferably new. Send me a PM if you have one to sell
-
I've got far too many tx2000 primers here in Suffolk, near Debenham... (possibly got some other bits too?)
-
I'm only a novice, but I have VP70's here as well and the 35s don't seem very similar to be honest. They are shorter for a start.
Hopefully there will be some recipes soon
-
Really struggling for recipes, anyone?
-
I'm after some un-primed as well!
-
I had a Baikal O/U that would bend carts like that so they wouldn't eject. I never got to the bottom of it!
-
Hi there,
Do any of you guys have any load data for the B&P 35, and 44 wads? Non-Toxic Obviously. And preferably using Alliant Steel.
I would be grateful of any you could PM me across (even if they don't use Alliant steel).
Thanks.
-
Hi,
I am trying to get hold of some Alliant steel powder, and I am struggling.
Does anyone know anywhere that has some in stock. Preferably around Suffolk.
If not, does anyone have some spare to sell?
Thanks in advance.
-
What diameter cutter do you use Duke?
-
The recipe I have states it must use a Wagner VP70 wad, and I can only get hold of the Helarco Vp70 ones.
Does anyone know if they are the same, and is it OK to substitute them.
Thanks in advance.
-
I've got some 3mm cork sheet so that I can cut my own 3mm cork spacers for a load I want to do.
I would like a 12g cutter and a 20g cutter so that I can use them in various shells. Do any of you guys know the nominal diameter, and what do you guys use to cut your own with?
Thanks in advance
10 Bore reloading
in Wanted
Posted
Looking for all 10 bore reloading components but mainly:
A suitable crimp press/ RTO tool.
Wads.