matt fieldcrafter-uk

Thanks gents , no a member of another forum , he doesn't want to whole sake make knives just a hobby . The maxi grinder is made by down land engineering , I don't know the current price but it was a lot 4-5 years ago

Thank you gents , it's all sold and being collected today .

I'm not as close as I hoped with that one Dave , I got pretty far then ground to a hualt . Learned loads getting this far and blasted a few hundred ££ in prototype ..

Thanks fellas , there is a few people interested I the set up so maybe they can sell you some of the patterns I used to make ??! I have tried everything Dave , just can't get round the dust , I seem more suseptable to it than most , I know most makers are fine with it but it ruined me . I breath like darth vadar at the moment , I've just got to not breath in any from now on . Ali's not lost I will find something else to apply myself to ! Give me a few weeks il have something to show .

No sorry no more knives from me ! Thanks for all the support and custom over the years Guys !!

Thank you gentlemen . I have something else I want to do that may interest you but it will be a few weeks before I'm ready to unveil it !!

I'm in Lincolnshire . I really would like to see it as job lot that way everything has a purpose and can get someone making knives or making some extra money . Lots of reasons but the one that bought it to an end sooner was a meeting with my dr that scared the hell out of me , I'm asthmatic and he told me some stuff that made my mind up once and for all , long and short I need to make a living through something that involves no dust !! 6 years worth of energy and money gone into building thus up to where it's at and I have run out of time , patience and the will power to take it further , then the dr thing and , well it's just time

Also I have compiled a list of suppliers , and all the companies I use for laser cutting heat treating materials etc . Thus will come with the sale along with any digital templates I have !! So it really is everything you need to get started !!

Maxi grinder and belts Templates Bandsaw Folder fixings and pivots Handle materials Extractor Belt and disc grinder Chemicals Forge Electrolyte etcher Polishing lathe

Well it time ! Everything I have for a knife workshop for sale . The Direct Drive Maxigrinder The professionals choice belt grinder. 2Hp direct drive, 240v single phase will run from conventional hhld supply, Invertek Optidrive speed control range from 02800 RPM with full power, at 1400-2800 power is reduced proportionally relative to the speed from 1400 down to 0 RPM. Takes 50 x 1800 to 50 x 2000 belts, angle-adjustable platen head, approx 15deg either side of vertical, worktable is also adjustable and extendable for when head is tilted, removable tool arm so a range of accessories can be fitted. Approx 45Kg, .6m wide .6m high x .75m long. Comes with 4x40 new grit ceramic belts 4x240 new grit ceramic belts 1x worn 40 grit 1xworn 240 grit useful on handles and for practice. 1x jig to hold knife blank. 2 wooden preset angles (4 angles for bevels) 1x digital angle finder (needs a battery) Clarke (permanently) converted wood lathe /polishing lathe Bench mounted polishing lathe with variable speed, this is the best polisher I have had yet. Comes with 2x m3 scotbrite mops and a collection of worn standard mops with compound Clarke CBS250 10 wood band saw Great saw comes with one worn belt fitted and one new. CLARKE CS6-9C BELT AND DISC SANDER Heavily used machine , very useful as you can imagine for flattening blanks and handle materials . Clarke CDE1000 dust extractor Used but works great still . Electrolyte metal etching machine Great machine made in the uk , easy to use Steel and knife blanks Large sheet of 15N20 steel, this can be hard to find and expensive when you do find it. The sheet is 2mm thick 1m long and 35cm wide , its in the annealed state (soft) and is the portion of the steel that resists acid etching in pattern welded steel , there are two smaller overcuts with this and some other bits of o1 tool steel so you can make a billet up straight away .there are also 5 damasteel (stainless steel Damascus steel) blanks 2 kitchen knives and 3 utility knives , they are not heat treated yet , plus one bar of silver steel 34.5cm long 2.5cm thick also annealed ready for forging. I may find other bits and add them to this before collection! Handle materials Well over 100 handles worth of African hard wood, very hard and dense wood called wenge , looks great and has a really nice grain when polished . Many off cuts of synthetic materials like micarta, G 10 etc, enough for some small knives and also plenty for stacked washer handles also plenty of leather for stacked washer handles to. There are maybe 2 or 3 red stag antlers there to, nice for stick tanged knives. Brass sheet for liners. brass, ally and steel tubes and pins for fixings and lanyard tubes, plus a bar of brass for guards/bolsters/pummels. I have some very nice fixings for folding knives in there to, bronze washers, pivot pins and fixing pins, mostly in torx head. Chemicals and additives There is one pot of black epoxy additive for colouring epoxy to fill file work on knives. One chemical blacking kit for cold blacking carbon steel, ferric chloride granules for etching blades/pattern welded steel. Boric acid powder for flux when pattern welding and some silver solder and flux for soldering guards etc on knives .also one liquid inlay (black) Templates for knives machetes and sheaths I have all my templates for knives plus conceptual drawings and more than 10 cad files. There are loads here from small finger through utility neck knives right up to kukris and machetes. Lots I never made or where one offs. Literally years of work in paper digital or wood form. There are some sheath patterns in there to. so if you not very skilled with correct knife design or want something you know will work but want to adapt they are there , you could also order laser cuts from the designs and have 100 or more delivered to your door ready to grind into knives !! Some of the designs have been very successful and have sold in the hundreds so you have security there and you know they are a very sellable product ! Vertical welding forge I made it myself as they are not commercially available, this is bar far the best and most versatile and controllable I have made (this is mk7) it comes with a modified swan forge burner, that he been adapted to be forced air /propane. Comes with 2x blowers for air feed (one needs wiring) the forge its self which will with stand welding temperature all day long , so many years of work from this. It has a high quality regulator with flash arrester new hose, regulator key lots of spare parts for adapting the burner if you want to and the original swan regulator. In terms of versatility I can anneal steel in this, forge a blade, heat treat and weld pattern welded/Damascus steel. Once its heat is built up you can choke it right down for forging etc. I have forged an 11.5 lbs billet of pattern welded steel so it can do the work very very well. Very used pillar drill with cross vice Im not going to tell porkpies this machine is almost knackered but still drills holes well and you can fit the cross vice if you wanted to mill out slots etc , Im not charging for this its just in with the sale. More things may turn up and I will add them if they do!! A great little business opportunity for someone or a great place to start for enthusiastic hobbyist. Collection and cash is needed on this, you may want a van or large trailer to collect it all !! £1,500 Ono All the best, matt .

Thanks gents . Hi, I have one large and two small left , im not make anymore now I emptied the workshop today so this is the last from me ! All the best , Matt

Hi guys all the larger ones are sold , all the little ones are available . They are aimed at hunting /utility /bushcraft really. I'm would be happy to skin with one test (larger) I really hope everyone that wanted the smaller ones notices the advert , I wouldn't have made so many other wise

Just 3 of the larger ones left after Paul's had gone

Hello gentlemen , I have theses ready to post , all made from 4mm thick o1 tool steel , African hard wood handles and 3.5mm thick English calf leather , the small ones are pouch sheaths , but you could knock a nail through the leather to hang them as neck knives easily . The larger are all right handed belt carry . £55 for the larger and £50 for the small . They are advertised in a good few places so won't be here very long. Just to be clear its first come first serve sale .

Hi guy we are looking for a vizsla bitch , fully kc and non spade please , preferred under 2 years and not a pup , to be used in falconry . All the best , Matt

Thanks guys , I'm glad they arrived , I ordered a good bit of steel to be collected tomorrow so can make up a few more as requested . I just hope the advent doesn't get lost before they are ready !!

I will do my best for you guys !

All but the pattern welded knife are sold !!

Pm to you guys

Hi , getting to the end of making this sort of thing now . I'm not saying this will be the last but pretty close to being , custom / hand made stuff Priced to sell . Smallest first , 4mm o1 , cocobolo dymond wood handle , neck carry utility knife . £45 Drop points x2 both have African hard wood scales , one in black belt carry sheath the other east west /west East belt carry £50 each Full sized tasker £110 delivered Pattern welded fieldcrafter , 120 layers of etched steel , brass pummel , micarta scales £175

The one pictured above is sold now . Still the black handled one , which I may reshape a little to

Same knife same price Different shape

Bargain alert ! I need some money very quickly so this skinning knife and the bottom knife pictured below are for very quick sale priced at £175 each

If there is no interest in a week on this I will re profile the blade shape to a more hunter /utility blade shape . All the best , Matt

For those hard to reach high pigeons 😅 If I had the money I would have a go with that bad boy !!