barriemiles

Attached (hopefully) is a very poor quality scan of the relevant page from the 612 (Reverpress) manual that may help barrie out. The right hand page shows the piston in light setting (left) and heavy setting (right) Thanks for the info my gun has the piston as shown in your manual and it has 612vs on the receiver must try to get a manual for it Thanks again Barrie

Thanks Andy When I Got the gun Idecided to clean it and the piston looked to be the wrong way round with the rings facing the spring and not in the cylider,as I am not familiar with Franchis I thought I had better check as I dont have a manual Thanks again Barrie

I have just bought a Franchi 612 and have been told the piston can be put in either way round depending on load being used.AsI dont have a manual for this gun does any one know if this is the case and which way for light clay loads 28grm. Any help much apprieciated. Barrie

barrie I have also had the same gun it would not recycle reliably. it went back to wence it came for a full refund. a dirt cheap beretta 300 series, ie, 300/301/302/390. totally reliable easy to clean and a good resale value. a second hand beretta is a better buy than a new fab, or any other semi. infallable. the gun you see is a al390 gold mallard. THanks for the reply looks like I bought a Lemon it seems gun shops are as bad as used car dealers. Barrie

Hi New to shotgunning and have got a Fabarm euro3 semi auto I cant find out much about it as it seems different to the euro lion models any one got any info onthis gun and how to remove the bolt for cleaning would be much appreciated also it seems fussy about cartridges any suggestions for reliable cycling. Thanks Barrie