landlord

now sold....thanks for looking

No worries mate...thanks for your interest.

thanks for that....when you say full length do you mean to the end of the moderator. i have measured the barrel from breech to start of the moderator and it is 18.5 inches approx,overall length is approx 39.5 inches which would indicate it is a classic model. hope that answers the questions cheers

i think the stock is probably beech but cant guarantee that...also think that when i bought this it was called the classic....others on this site may have more knowledge.

as above s and b 6x42 hungarian with a8 reticle. some superficial light scratches to tube as normal on a used scope but glass perfect. this is a very versatile scope and sensibly priced as i need funds for another project. £225.00 includes u.k. postage

thks for your input gentlemen,hadnt considered making one so will try that first.

many thks for fast reply,had a quick look and the only item i can find with 3 pins is described as a "bushing" tool,is this what you mean?. have you had any experience with ordering stuff from the states?.

can anyone point me in the direction where i can purchase a spanner to remove the three hole discs used to retain the strikers in a ugartachea sbs.i have searched gunsmith supplies and various other tool suppliers but no luck so far.would appreciate any help.

it would seem i am not getting any interest so price now £200.00.[ a bargain at this money]

having just sold the rifle i have approx 350 rds of remington 40gr .22wmr free to a good home if you would make a small donation to help for heroes.the amount at your discretion. must be picked up with the appropriate slot on your cert. i am in east cornwall

s and b 6x42 hungarian 1inch tube with a8 reticle now for sale as i have just sold the rimmie it was attached to. it has minor scratches to the the black body and slight crimp but is in perfect working order with clear optics. 250.00 delivered or collect from east cornwall.if you need a pic pm me and i will email to you as i cant seem to do it on here,however the crimp is so shallow it doesnt show on the photos.

sold pending the usual

still for sale...now £40.00.

sold subject to the usual,thks

pump in v.g.c. looks to be unused-came with the rifle and air tank i purchased a few years ago and sat in the garage ever since. £50.00 plus £10.00 postage

2 x butler creek metal lips 25 round magazines in .22lr.these are in good used working condition and surplus to requirements. have built in studs to enable clipping together if required.£30.00 for the pair plus £5.00 postage.have tried to upload a pic but having problems....to do with file size???will email a pic if required or googl butler creek, thanks

thanks again gordon....will give them a try

many thanks to GORDON R for his excellent help with stock removal on my shotgun,now i need to find some firing pins/strikers and relevant springs for my parker-hale/ugartachea sxs.have sent emails to the factory for details of u.k.dealers but as yet no response. any help appreciated.

you are absolutely correct,but as i had to remove stock anyway i thought i could access from the rear(so to speak).my problem with the strikers is that when the gun is fired 1 of the pins stays proud of the breach and the other is slightly recessed,which is correct.

on this one nothing falls out,like you i have disassembled various firearms in the past but this is my first sxs.they will be differnces in the many types of action such as boxlock and sidelock etc,i am sure that the forum members will be happy to expand on this if you have a particular query.

thanks gentlemen....mission accomplished thanks to your detailed instructions.i didnt see that the floor plate screw had to come out.it is such a good fit that it looks like one complete piece,not two.now i just have to figure out how to extract the firing pins. once again,many thanks.

thanks for this amazingly fast response,i have removed screws as per your photo but as far as i can see there is only 1 thru bolt which is the one behind the safety,the 1 forward (if it was a thru bolt,would exit in the centre of the rear trigger).the stock can be wiggled up and down so its not being retained at this end,it seems to be where the stock meets the action if you see what i mean.

need some help from you gunsmiths out there. i am trying to remove the stock from my parker-hale/ugartachea 12g sxs to work on it and think there must be a hidden fixing screw that i have missed.# i have removed the 2 screws at the top(1 under the safety and 1 under the top lever).2 screws holding trigger guard(behind triggers) and unscrewed the complete trigger guard.i can wiggle the action up and down but cannot pull the stock off,no other obvious fixings,but i am clearly missing something.any advice/help appreciated. if poss i dont want to have to take to a gunsmith(nearest one 30 miles almost). i have a reasonable amount of experience in disassembling various fire arms but this has beaten me so far.

sold to riggers subject to the usual.

as new,complete with box and all the accessories including flip up covers and sunshade.go to m.t.c. website for full specs and pictures.cant seem to upload my pictures due to file size but probably could email them if required.150.00 plus 5.00 postage.