The Clay Rascal Posted July 4, 2010 Report Share Posted July 4, 2010 (edited) HI ALL, HERE FOR SALE IS A NEW INPROVED VERSION OF A BERETTA GAS VALVE SOCKET I HAD MADE. THIS WAS BECAUSE I NEEDED SOMETHING TO REMOVE THE DREADED GAS VALE NUTS ON MY URIKA 2. A SIMILAR ONE FROM USA MADE OF AN UNKNOWN METAL COST OVER £45 TO BE SHIPPED HERE. THESE ARE MACHINED FROM HIGH GRADE TOOLING STEEL AND HAVE A QUARTER INCH SQUARE HOLE DOWN THE CENTRE USING A SPARK ERODER MACHINE PLUS A HOLE THROUGH THE SIDE TO ENABLE THE USER TO USE A VARIETY OF SOCKET BARS TO UNDO THE GAS VALVE NUTS. Spark eroding is a manufacturing process for removing excess material often not accessible or achievable by conventional machining processes on hard metals. PERSONALLY I USE A SCREWDRIVER WITH QUARTER SOCKET BAR WITH MINE, BUT YOU CAN ALSO USE A SOCKET WRENCH WITH THE QUARTER INCH SOCKET BAR, I ALWAYS USE COPPERSLIP ON THE GAS VALVE NUT THREAD TO ENABLE EASY REMOVAL. TO BE COST EFFECTIVE MY RELATIVE MADE 10, SO I NOW HAVE ONLY 3 LEFT FOR SALE. AND ONLY WANT TO COVER MY COSTS. PRICE POSTED TO UK ONLY, 2ND CLASS RECORDED, SIGNED FOR IS £26.00 SOCKET ONLY, NO OTHER PARTS THESE CAN SOURCED LOCALY PLEASE DO NOT CONFUSE THIS WITH A CHEAP ONE MADE IN THE UK OF AN UNKNOWN METAL. FOR MORE PICTURES OR INFO PLEASE PM ME, THANKS MICK Edited July 4, 2010 by The Clay Rascal Link to comment Share on other sites More sharing options...
fern 57 Posted July 4, 2010 Report Share Posted July 4, 2010 HI ALL, HERE FOR SALE IS A NEW INPROVED VERSION OF A BERETTA GAS VALVE SOCKET I HAD MADE. THIS WAS BECAUSE I NEEDED SOMETHING TO REMOVE THE DREADED GAS VALE NUTS ON MY URIKA 2. A SIMILAR ONE FROM USA MADE OF AN UNKNOWN METAL COST OVER £45 TO BE SHIPPED HERE. THESE ARE MACHINED FROM HIGH GRADE TOOLING STEEL AND HAVE A QUARTER INCH SQUARE HOLE DOWN THE CENTRE USING A SPARK ERODER MACHINE PLUS A HOLE THROUGH THE SIDE TO ENABLE THE USER TO USE A VARIETY OF SOCKET BARS TO UNDO THE GAS VALVE NUTS. Spark eroding is a manufacturing process for removing excess material often not accessible or achievable by conventional machining processes on hard metals. PERSONALLY I USE A SCREWDRIVER WITH QUARTER SOCKET BAR WITH MINE, BUT YOU CAN ALSO USE A SOCKET WRENCH WITH THE QUARTER INCH SOCKET BAR, I ALWAYS USE COPPERSLIP ON THE GAS VALVE NUT THREAD TO ENABLE EASY REMOVAL. TO BE COST EFFECTIVE MY RELATIVE MADE 10, SO I NOW HAVE ONLY 3 LEFT FOR SALE. AND ONLY WANT TO COVER MY COSTS. PRICE POSTED TO UK ONLY, 2ND CLASS RECORDED, SIGNED FOR IS £26.00 SOCKET ONLY, NO OTHER PARTS THESE CAN SOURCED LOCALY PLEASE DO NOT CONFUSE THIS WITH A CHEAP ONE MADE IN THE UK OF AN UNKNOWN METAL. FOR MORE PICTURES OR INFO PLEASE PM ME, THANKS MICK Hi would this work on ulrika teknys mate, many thanks. Link to comment Share on other sites More sharing options...
JonD Posted July 6, 2010 Report Share Posted July 6, 2010 Hi would this work on ulrika teknys mate, many thanks. Yes, I bought one the last time they were advertised and the quality is excellent and use it on my 391 Urika Teknys and it makes the job a doddle Jon. Link to comment Share on other sites More sharing options...
The Clay Rascal Posted July 6, 2010 Author Report Share Posted July 6, 2010 Yes, I bought one the last time they were advertised and the quality is excellent and use it on my 391 Urika Teknys and it makes the job a doddle :blink: Jon. glad ur happy Jon and it's working fine, many thanks Mick Link to comment Share on other sites More sharing options...
The Clay Rascal Posted July 6, 2010 Author Report Share Posted July 6, 2010 glad ur happy Jon and it's working fine, many thanks Mick Have put one by for crossy 666, so only 2 left. regards Mick Link to comment Share on other sites More sharing options...
Recommended Posts