silverhawk Posted September 7, 2010 Report Share Posted September 7, 2010 ruger 10/22 hammer and sear pack brand new purchased afew days ago from midway for £67.96 but decided im going to buy a complete volquartson trigger looking for £45 posted i will include reciept from midway. The Power Custom Hammer and Sear Pack is an inexpensive and easy way to upgrade the performance of your Ruger 10/22. When properly installed, this kit produces a remarkably light 2-3/4 lb trigger pull. Fitting the sear to the safety will require hand stoning. Please note that without hand stoning, the safety will appear on but the rifle may still fire. Please Note: Some Ruger 10/22 models will require the use of two Ruger hammer bushings for proper insallation (product 510559). 10/22's that already have separate hammer bushings will not need new ones as the factory ones can be re-used. Technical Information Material: Heat treated steel Notes: This is a matched pair. Hammer and sear should be used together. These parts are drop-in except the fitting of the sear to the safety. This requires hand stoning. Without the hand stoning the safety will appear on but the rifle will still fire. Sear must be stoned to fit to make the safety work properly. Drop in kit that produces a 2 LBS. Trigger pull. EDM produced. Includes an Extra Power Hammer Spring, Extra Power Disconnector Spring, Replacement Trigger Return Spring, 2 Hammer Shims, & 2 Trigger Shims. Link to comment Share on other sites More sharing options...
matthic Posted November 19, 2010 Report Share Posted November 19, 2010 Do you still have this kit? Link to comment Share on other sites More sharing options...
matthic Posted November 29, 2010 Report Share Posted November 29, 2010 If you have this I'll take it. Matt Link to comment Share on other sites More sharing options...
Recommended Posts