marlin.45 Posted January 15, 2006 Report Share Posted January 15, 2006 (edited) I have sitting on the desk a .22 sound mod which does not fit my rifle but may fit yours. Note this is for air rifle (non-FAC) use only, due to the legal implications. Say no more.... Belived to be a PH mod but the thread is not known. I know it is not a 1/2"x20 UNF as my rifle is but it is 1/2" dia. but a different thread. If you see what I mean? It is black 4" long and about 3/4" diameter. Strippable for cleaning. Offers around £10 plus postage. Edited January 15, 2006 by marlin.45 Link to comment Share on other sites More sharing options...
Guest Mr Pieman Posted January 15, 2006 Report Share Posted January 15, 2006 Check the length again, if its nearer to 6 inches it will probably be the same as on my Anschutz. Does it contain a series of tapered aluminium disks, approx. 3/4" each? If it does, I'll have it PP Link to comment Share on other sites More sharing options...
marlin.45 Posted January 16, 2006 Author Report Share Posted January 16, 2006 (edited) It must be the way I measure inches? 4 3/4" to 5" is closer to actual measurement and it came off an Anschutz .22. Open it up from the threaded rear section and I can see disks and a spring inside. Sound right? Cheers, Paul Edited January 16, 2006 by marlin.45 Link to comment Share on other sites More sharing options...
Guest Mr Pieman Posted January 17, 2006 Report Share Posted January 17, 2006 I'll have it! PM me your address and a name to write the cheque to. Cheers PP Link to comment Share on other sites More sharing options...
Recommended Posts