Hoss Posted February 12, 2006 Report Share Posted February 12, 2006 Hi, just woundering if anybody could tell me how to remove the trigger on my beretta 686 sporter as my trigger guard seems to be loose? Thanks very much hope i,ve done this right as i,m new to this site. Quote Link to comment Share on other sites More sharing options...
Dunkield Posted February 13, 2006 Report Share Posted February 13, 2006 Hoss, Welcome aboard :thumbs: From memory... There is a screw at the back of the gaurd, but the front has a threaded stud welded to the guard, so you rotate the whole gaurd to tighten and then put the rear screw in. I haven't owned a 686 for about 10 years at least so I hope that is about right, if not or you don't get the answer here I would get it into a decent gunsmith for advice. p.s. If you look up you will see 'My Controls' go in there and fill in your location details when you get a second Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.