Bradders Posted January 25, 2012 Report Share Posted January 25, 2012 Does anyone know if it is possible to add sensors/switches to a factory fitted alarm system. Bascially I would like to extend a pick-up truck alarm system so that the load area is protected. I will be fitting a hard tonneau/roll top but also want the covered area protected by the alarm system. For example, can ultrasonic sensors or a plunger switch at the tail gate be added and wired into the system. Any help and advice much appreciated.....Thanks..... Quote Link to comment Share on other sites More sharing options...
beerdeor Posted January 25, 2012 Report Share Posted January 25, 2012 (edited) Does anyone know if it is possible to add sensors/switches to a factory fitted alarm system. Bascially I would like to extend a pick-up truck alarm system so that the load area is protected. I will be fitting a hard tonneau/roll top but also want the covered area protected by the alarm system. For example, can ultrasonic sensors or a plunger switch at the tail gate be added and wired into the system. Any help and advice much appreciated.....Thanks..... Ultransonics I would say very unlikley how a dip swithch should pose to much trouble assuminmg you can find the alarm ecu and with a meter locate the wire that triggers the original doors hth Jim Should have asked what vehicle and also does it have a warning any where to alert you if a door is open Edited January 25, 2012 by beerdeor Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.