david hunter Posted February 12, 2012 Report Share Posted February 12, 2012 hi all.fitted 4 grabbers to my d22 navara about 1 year ago.the drivers side rear tyre has worn down really quickely compaired to the other 3.does anyone know what could cause this thanks dave. Quote Link to comment Share on other sites More sharing options...
Dr_evil Posted February 12, 2012 Report Share Posted February 12, 2012 I'da said tracking if it was a front wheel, as to rear only thing I can think of would be a bad bearing or depending on how you drive it could be due to the diff, my tyre wear is slightly uneven on the back due to one of my rear wheels always slipping and spinning up on the entrance…..something to do with the angle of the hill as far as I can tell as both of the landrovers do it. No idea how the Navaras are set up but the fuel tank isn't on one side is it or you don't carry more weight on one side than the other etc ? Little things like that can have a big effect on wear Quote Link to comment Share on other sites More sharing options...
david hunter Posted February 13, 2012 Author Report Share Posted February 13, 2012 thanks for answering.i carry no weight at all mainly used for work.but week ends on farms mostly 4wd in low gear.but will get bearing checked .thanks dave Quote Link to comment Share on other sites More sharing options...
bfg1980 Posted February 13, 2012 Report Share Posted February 13, 2012 i have a pathfinder that done the same, i upgrade all shocks and that cured the problem, hope that helps Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.