kip270 Posted November 4, 2006 Report Share Posted November 4, 2006 Hi Guy's, i have a RWS C225 co2 air-pistol. I have had it a while, and now when i put in a co2 bulb it leaks out. I have spent a while do searches but can't find anything on where to get a replacement valve seal !! Anyone out there know of anywhere?? Quote Link to comment Share on other sites More sharing options...
Theskyfox Posted November 4, 2006 Report Share Posted November 4, 2006 Hi, Im afraid I have no idea how to fix this, but may I suggest you contact the manufacturers? They can be very useful and might even directly send you the parts. I say this because I contacted Brocock in the week and their service was truely Superb (I even spent half an hour talking to the guy about the gun handling lol!). Failing that, give your local gunsmiths a ring and see if they can get it. I'm sure it shouldn't cost much, let me know how you get on -Andrew Quote Link to comment Share on other sites More sharing options...
pin Posted November 7, 2006 Report Share Posted November 7, 2006 You will probably find it is a standard size commonly available part, try taking it to bits and identifying the part, use some verniers or something to measure it up accurately and try and source one! Good luck! EDIT: You will definitely find this link very useful, exploded diagram with a key of the parts, listing RWS/Diana part numbers http://www.airgun-express.com/schematics/rwsmodelc225.asp Quote Link to comment Share on other sites More sharing options...
kip270 Posted November 7, 2006 Author Report Share Posted November 7, 2006 Cheers Pin, don't think i'll try to do myself then, looking how it has to be stripped down Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.