mack872 Posted August 22, 2013 Report Share Posted August 22, 2013 I have a webley raider 10 it lost power with no leaks that I could see, the barrel had not twisted and the seal was good. It went off to be fixed but only had the hammer spring changed, the power adjuster was wound right in so I adjusted it and get a reasonable power ftb. The only problem is it makes a louder noise now as if it needs more from the hammer, as the power only hits at a 190 bar charge, any suggestions would be appreciated. Also I understand more hammer due to pressure , this gun always worked great at 150 bar. Quote Link to comment Share on other sites More sharing options...
Underdog Posted August 22, 2013 Report Share Posted August 22, 2013 A little confused over what you ave actually done.....But some hammer designs work on stroke over spring rate/weight. Lengthening a hammer stroke gives the hammer more momentum over the valve. Some hammers have adjustable stops that limit the valve open dwell time.....bear this in mind with what ever the hammer design is on your Webley. U. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.