BigL Posted March 13, 2014 Report Share Posted March 13, 2014 Hi, I have had my BSA ultra for about 18months, but it has now started to lose its charge over a couple days. Does anyone recommend any good repair shops preferably in south Kent. Or have easy is it to replace the seals etc myself. All advice welcome. Quote Link to comment Share on other sites More sharing options...
harlowmaverick Posted March 14, 2014 Report Share Posted March 14, 2014 I know some where that could do.it but they are not in Kent. They are on the border of London and Essex but could probably do it for you whilst you wait. Pm me for details if your interested Quote Link to comment Share on other sites More sharing options...
ChAoS Posted March 14, 2014 Report Share Posted March 14, 2014 *If* it's the fill valve that's leaking: My Ultra is circa 2007. When it started to lose air if filled with a bottle - but *not* with a pump - I consulted BSA. Not only did Chris send me fill valve O-rings FOC, but he instructed me on how to fit them. It was the same story when a bolt sheared in my pre-banjo-pin Scorpion. (Which now *has* a banjo-pin...) Funnily enough, I sent an email to BSA, yesterday, re the Scorp's trigger. Also, the Scorp's fill valve is exhibiting the same symptoms as the Ultra did. I assume another set of seals will fix it. Finally, if you *do* fix a fill valve leak, remember that you can alter the entry angle if you want - mine's now filled from the side which allowed me to have a rod fitted to the underside of the stock to get the bipod much further forward. I've always found BSA's aftersales support to be *very* good - drop them a line. Regards, Mark. Quote Link to comment Share on other sites More sharing options...
lineshooter Posted March 14, 2014 Report Share Posted March 14, 2014 If it was brought new, you have a two year warrenty from Bsa. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.