rabbithunter2008 Posted August 2, 2008 Report Share Posted August 2, 2008 Hi there all. does any body know how to tune air arms s400 to full legal limit? or can anybody in notts help me out. please pm me many thanks Quote Link to comment Share on other sites More sharing options...
codling99 Posted August 2, 2008 Report Share Posted August 2, 2008 should be allready on legal limit?? if not,take it to a gun shop an enquire,a gunsmith should be able to sort it out,dont do nowt your self,cos if it goes over limit you could end up in clink Quote Link to comment Share on other sites More sharing options...
smudger1 Posted August 10, 2008 Report Share Posted August 10, 2008 (edited) Hi, if your S400 is less than a year old, anti tamper measures have been fitted to prevent it being adjusted to fire over 12ft/lbs. If it is older, it is posible to adjust it, but its only safe to do so when done in conjunction with a chronograph. Remember if your gun is found to be over the limit, not only will you be prosicuted, but the gun will be destroyed. Most new guns are set at around 10.5 to 10.8 to allow for the power increase as the internal parts settle in. I occasionally shoot FT and have my S400 set at 10.5, it has plenty of power and is deadly accurate at this setting. At 40 yds it will still put a pellet through both sides of a rabbits skull, what more do you want. If you want to improve your gun, buy a 9 shot magazine from Rowan Engineering, it makes the S400 almost as good and easy to use as an S410, but saves a lot of money. hope this is helpfull, good luck smudger Edited August 10, 2008 by smudger1 Quote Link to comment Share on other sites More sharing options...
bullet boy Posted August 11, 2008 Report Share Posted August 11, 2008 Again your rifle should be on legal limit.Why do you want it tuned? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.