jay222
-
Posts
647 -
Joined
-
Last visited
Content Type
Profiles
Forums
Calendar
PW Shop
Posts posted by jay222
-
-
My 550 broke like this and needed a new ccd which Thomas jacks fitted, cost £55 if I remember right works perfectly again now. They are very helpful if you get in touch with them
-
No shi lol if you get a good load for them amax's you should be able to reach out a long long wayShooting, lol
Gongs, and other stuff ;-)
-
Looks nice, what's it's intended purpose?
-
Great start
-
I've used a t bolt, really liked it accurate light and fast to cycle
-
WHERE!?!?!
that is seriously cheap
it was well over £35 the last time I bought factory norma and that was a while ago
I got lucky with some norma in 7mm rem mag a while ago that was £24 a box I can't buy rem mag brass for that normally
-
I really fancy another hushpower, had a .410 before but think the 20g would offer more. Anyone had both like to offer any advice?
-
Nice one, set up looks nice and obviously does the job
-
Varies hugely from a few weeks to months, depends on how busy they are and if they want to come and see you for it
-
I don't own one but I have used one, very good accuracy but is a bit heavy if that's important to you
-
That looks just like a tasco I've got in the back of a cupboard, used to be on my hmr was fine in daylight but a bit fussy if you wound the mag up in low light
-
Mine is a 2008
Sorry for the **** pic but just look by the proof mark
-
The year of manufacture should be on the side of the action 👍
-
Result! Nicely done
-
Fair enough going to be a dodgy one to sell then
-
If its over 40 inches it would be section 1 if its got a sub 24inch barrel
-
'Cheaply' haha good luck
-
No accuracy advantage but possibly better balance depending on what stock you have, my 10-22 has a heavy volquartsen barrel on it and that balances nicely and is very accurate. No mod on mine at the moment though as it has a 13/16?? Thread on it but it's not really a problem for me if I want to go quieter I take my cz452
-
Sell it to someone else or to an rfd or surrender it for destruction to the police
-
I've got a cz which I love but I've shot sako, savage and browning hmrs and they all work fine so just buy one you like the look of and enjoy
-
The best I've done for a variation was about a week so there's no consistancy with itThats tidy,I have had my new rifle built,and its waiting to be picked up. Apparently its all sorted just waiting to be signed and posted.
-
-
I went .223 but whichever you choose I'm sure it will do the job no problem
-
is that drop for the 20gr vmax then? I thought the rem could push 4200 with a 20grAs you can say there set for same bullet just I've set it to 4000fps nearer to .17rem and out to 300 yards its one inch drop which is nothing really.... What I've found with the ackley hornet is .2 grain powder equals approx 100 fps in speed... I think the gun has more to give as there's reports the yanks are pushing it to 4000fps but I'm happy with how it runs now. Using 20grn vmax data
semi open ticket?
in General Shooting Matters
Posted
It looks closed to me