The Clay Rascal
-
Posts
120 -
Joined
-
Last visited
Content Type
Profiles
Forums
Calendar
PW Shop
Posts posted by The Clay Rascal
-
-
Hi all just a little manual I made for all of you who may have missed it , here is a link
http://eastmiddleton.com/shotgun/BERETTA.391.GAS.VALVE.DISASSEMBLY.GUIDE.pdf
-
Hi Steve I have sent you a PM , did you see my online manual to remove it?
-
MOTHERBOARD GIGABYTE GA-631M-ESL2 4GB RAM
BOOKS AND SETUP DISKS FOR MOTHERBOARD AND GRAPHICS
NO HARD DRIVE
INTEL Q6600 CORE 2 DUO CHIP
AKASA HEAT SINK AND FAN
5 CASE FANS
SEE THROUGH SIDE WITH FAN 1 FAN
USB 2- 6 PORTS
USB 3- CARD, 4 PORTS AT BACK
GRAPHICS- ASUS GT6 -SL2GD3-L
BE-QUITE PURE POWER 530W POWER SUPLY BQLT7-530W
SUPER MULTI DVD WRITER GH24NSBO
POWER CABLEPLEASE RING FOR MORE DETAILS
ADDITIONAL i7 920 XEON INTEL CHIP SOCKET LGA 1366 1333MHZ BUT DOES NOT FIT THIS MOTHERBOARD.
BUYER COLLECTS ONLY £120.00 OR OFFERS
COLLECTION ONLY FROM RAMSGATE KENT
PLEASE PHONE 07789265475
-
Wow a great gun I sold my urika 2 for 700 so this is a great buy, any one who buys this can download the manual I made for free, here is the link.
http://eastmiddleton.com/shotgun/BERETTA.391.GAS.VALVE.DISASSEMBLY.GUIDE.pdf
Good luck with the sale wont be on here that long at that price.
-
Great guns these and this is well worth the money, sold mine for 750.
Anyone buying this may want to download my free gas valve strip down manual.
-
E Rizzini has three choke systems depending on the age of the gun that was made 1966 to 1996, and then continued by his nephew I Rizzini until current.
The earliest ones has stubby 20mm chokes with 5mm exposed, while the later ones have longer flush chokes, but the thread TPI and position is different on the mid production from the end production, so you will need to ID which specific choke series you have.
E Rizz did not make 1/8 skeet M/C ( to the best of my knowledge, never seen one), although he did make dedicated FC skeet guns.
To get skeet you will need either to open up 1/4 chokes by 5 thou, or buy in the current aftermarket.
I'd suggest Mandel 1/8 sk pair side ported at £34-95 each
www.####.co.uk
A picture of your existing flush choke will be needed for positive ID of which system you gun has.
Hi Jerry thanks for the reply, have been in harrow hospital with the wife now we are back.
I will post a pick of my choke on the forum, thanks for the advice.
Mick
-
Hi skeet chokes wanted please, my flush fitting chokes are 3,7mm long,
Thanks Mick
-
This has now been sold,
-
Is this still for sale ? Thanks
Hi Some is going to try it this sunday, deal nr sandwich Kent, had 4 replys now if the others do not buy i'll contact you thanks Mick.
-
Hi This is my gun, Price dropped to £100.00 for quick sale, RFD MY END IS £35.00. A great little gun for not much money. LOP is 14 and a quarter inches , too short for me .
THANKS FOR LOOKING.
I Shoot at deal and sandwich shooting ground and u can always try it out there.
-
Hi this is my gun, LOP is 14 and half inches, great starter gun for someone.
Cirt holders only, please feel free to call me or message me.
Thanks for Looking
Quick sale needed,Now £100.00, price drop.
Anyone?
-
Hi All this is a price drop, Now £100.00.
Before I swap for some 28gm 7 and a half fibre.
-
Well I put a RED RUBY FIBRE OPTIC on my trap gun the day b4 I entered and won my first DTL comp at Sandwich
Each to their own .
-
Price drop for quick sale £120.00
Thanks for looking
-
Just to clarify this is a( The RUBY Fibre-optic sight) and as such provides the same benefits of other fibre-optic sights, but it is not an easy hit sight.
-
Yes great have one on my trap gun also.
-
Hi this is my gun, LOP is 14 and half inches, great starter gun for someone.
Cirt holders only, please feel free to call me or message me.
Thanks for Looking
-
Huds why dont u RFD IT , get the money up front and take it to a dealer, this is a nice gun and I have seen it at my local ground, I rfd'd my beretta at Wlson and wilson.
Cheers Mick
-
HI, WOULD LIKE THE ABOVE WITH A PRICE .
POSTED TO RAMSGATE , KENT
Thanks
-
HI HERE ARE SOME PHOTOS OF THE BAYONET.
KNIFE MAKER IS RICH. A. HERDER. GERMANY, THIS IS ENGRAVED ON THE HILT.
THE FROG MAKER IS I THINK, MARKED ON THE LEATHER HOLDER IS FRANZE BREHME, HILDESHEIM, LOWER SAXONY, GERMANY.
Price is £130.. plus postage recorded signed for at your cost.
Cheers Mick
I NOW HAVE SOME BETTER PHOTOS IF ANYONE IS INTERESTED.
Cheers Mick
-
Sorry everyone, waiting for the owner to contact me with what he wants for it, he is currently away, also I cant seem to get the photos smaller to list it.
SO PLEASE CONSIDER IT REMOVED UNTILL HE CONTACTS ME .
THANKS MICK
HI HERE ARE SOME PHOTOS OF THE BAYONET.
KNIFE MAKER IS RICH. A. HERDER. GERMANY, THIS IS ENGRAVED ON THE HILT.
THE FROG MAKER IS I THINK, MARKED ON THE LEATHER HOLDER IS FRANZE BREHME, HILDESHEIM, LOWER SAXONY, GERMANY.
Price is £130.. plus postage recorded signed for at your cost.
Cheers Mick
-
State a price please, in accordance with house rules.
Sorry everyone, waiting for the owner to contact me with what he wants for it, he is currently away, also I cant seem to get the photos smaller to list it.
SO PLEASE CONSIDER IT REMOVED UNTILL HE CONTACTS ME .
THANKS MICK
-
Hi it's similar to the one in this link
,http://www.quanonline.com/military/military_reference/german/blades/stag_bayonet.php
but has a wood handle, and is in a poor condition, the portapee is the hanging part that is a part worn by officers I am told.
I will post pics later.
Thanks for the replys.
Mick
-
Can I advertize this on Here,?
Beretta AL391 Urika 1
in Guns for Sale (Private Sales)
Posted
Have a Rizzini multi choke u could try at my local shooting ground at Sandwich kent , swap ?