Xskppy

Fair enough , I get that it's acceptable if it's for pest control . Maybe they are a bit trigger happy in my area of Northern Ireland lol. It was always said that if a dog has tasted warm/live blood it would do it again because of their nature . Just thought I'd ask here to get other people's opinion . Cheers guys Plus I do be pretty happy with the presents my cat delivers to my porch although the wife isn't to pleased .

Ps , I'm not a dog hater I have 2 of my own , one sleeps on my bed

No it's not a wind up , where I'm from if a dog broke out and killed a farmers lamb it would be put down . Just different ways of doing things I suppose . I don't think it's in every dogs nature , when my goat was killed the brother of the dog did not take part in the killing . The dog who done the killing stood in my yard ripping the throat out of the goat . You say it shouldn't be punished for such an aggressive act of behaviour your deluded . If any of my nieces or nephews had of been around can you say that dog wouldn't have attracked the when it's blood was up ? It went for my dad and aunt before it was shot .

Hi guys I hope this is the right forum for this question. I have been having a debate with a guy I work with , his mother in laws jack Russell has killed a few of his chickens and refuses to admit the dog shouldn't have done it , I was under the impression if a dog has killed another animal he should put down . A neighbours dog broke out and killed a pet goat I had and the neighbour didn't hesitate in putting his dog down . Another guy at work says his jack Russell has killed a few rabbits when he takes it out for walks but is insistent this is normal behaviour for his dog . Any feedback on this matter would be appreciated Shane

Was this with the standard magazine or the extended 1?

Why what happened to yours?

I recently traded in my logun mk2 for a Remington 597 Anybody got this rifle any tips or tricks I could use? My logun was a learning experience in gun care/maintenance/repairs 😊

Yes I'm assuming its the thread on the moderator , when I'm looking down the barrel it doesn't seem twisted or bent

Yea but I originally thought it was the baffles inside the silencer but it turns out that the silencer was out of line , how would you resolve his issue?

Hi guys , so I posted on here before about silencer debris and I thought I had it sorted by changing the baffles but 2 weeks ago for no apparent reason I couldn't hit the side of a barn if I tried , I kept thinking the scope must have had a knock but when I was cleaning it I took the barrel out and looked through it I could see a quarter moon shape at the end , this is obviously the silencer , I was reluctant to drill it out as advised but I did and now when screwed on it seems my pellets now have a clear path , I haven't fired it yet cause I replaced the seals in the barrel a while ago but they have degraded badly and 1 defiantly needs replaced , getting seals locally is ambit of a nightmare but ill get it sorted and get back to yous with my results

I'm using bisley magnums , the pellet gauge that came with the gun has a 2 on it , according to the manual that is the gauge for these pellets , I'll try drilling out the silencer on mon , Thanks for the help

As I said in an earlier post I was finding debris inside my silencer and I couldnt find the proper sized plastic washer so I used the same diameter metal 1s so this tells me there's been a problem with this gun before I got it , So all I need to do is make sure the knitting needle doesn't touch the sides of the silencer and if it does it's out of line , Is this easily solved our do I need to send it to a gun smith ? If I drilled out the metal washers to 7mm would it help?

I know this might sound weird but bear with me I was test firing my logun into a 10 meter airgun target from roughly 33 yards and as my gun emptied the air cylinder myth pellets seemed to be swerving to the right and high before coming back in on target , sometimes this was dead centre sometimes it was way off mark Any advice??

Cheers I'll get them replaced and see what happens

Ok I took the silencer apart again and I found plastic washers or should I say the remains of plastic washers in between each spring 1 was an oval shape and all where broken so I just removed them and screwed the silencer back together the springs sounded loose at first but settled down and theres no rattle now I have also fitted a new Nikko stirling mountmaster 3-9x50 scope and I'm now using Bilsen magnum pellets and apart from the occasional jam I'm putting pellet on pellet from 45 yards , I checked the silencer after 50 pellets and there was no debris so I'm hoping it's sorted now Would the plastic washers that I removed be that critical?

Cheers ill give it a go and get back to you

Recently I took the silencer off my logun mk2 and I noticed debris inside the chamber ,when I opened it I found 2 pellets (1 severely damaged) so I checked the seals on he barrell and after I put it all back together I fired 4 pellets through it and I found some pellet debris inside again but it looked like it was just the skirt of the pellet , anybody have this problem before??

I removed the barrel and 1 seal needs replaced but I also noticed that my silencer had some pellet parts in it . When I opened it up I found 2 pellets in there does it need replaced ? I looked at the pellet gauge that came with the gun and it was a 2 that meant its for bisley magnums so I got some yesterday and ye ha it's a totally diff gun but I'm still getting some pellet debris in the silencer , Latest problem I have discovered is the eye piece section of my scope is loose it's got a dial I can change the colour of the cross hairs but I never use it so I'm gonna get it replaced With something more simple Gonna check out j s ramsbottom Seems to be plenty of deals there for scopes+mount

Anybody in the south down area willing to take a relative beginner hunting? 12 gauge or .22 airrifle

Follow this link http://www.bsaoptics.com/family.aspx?familyID=28&filter=%25

Hi guys I have a scope with no make or serial number on it all that's on it is IR3-9x50ARF I lost the elevation and Windage caps how would I know what 1s to get as replacements ? I have found a website that does them but not sure what 1s to get Cheers

Thanks

Thanks I was told by the gun shop that if I just filled it to 200 bar I'd get 30 ftlb out of it , plus I only get about 30-37 shots out of every fill But your right it's an awesome gun , I had a hatsun 60s before and it doesn't even come close , Sorry if I appear dim but where does the loading port blades go? Is that the part that receives the pellet when the bolt is pulled back? The logun penetrators I use at the min have a domed head but I'm not sure what type of loading blade came with the gun , I'll get on it and let you know how I get on Cheers

Hi guys I'm new to this so bare with me , I have a logun mk 2 fac and when I tried using pellets that where pointed and when I try to reload and the reciver comes out on the left to take the first pellet the 2nd pellet gets stuck in the *** of the first 1 stopping the reciver going back in , I changed to logun penetrators as they are a round top but every once n a while it still happens , I lube the pellets lightly with power pellet lube , have any of you had the same issues? Thanks