pal

yes i still have two left. call me on 07932695255.

I have few for sale.

I have few winchester 9410 for sale. two multic choke and one fix choke. I have few for sale

are you sell after a win 9410?

i have wo for sale, 2020, but i have 4 to chose from.

i will let you know.

you can get uberti winchester 44 40 on S2, and winchester 1866 yellow boy. on the left to right. win 1873, 44 40 (S2), win 1866 yellowboy (S2) next 5 win 9410, 410 (S2) 44 40 and 410 are kins.

I have 5 winchester 9410, 2 are multi choke, and other 3 are true. All are on SGC. I had a chance to hunt with these in canada and are great slug gun. Great range and effective. we took number 6, 8 shot shells and slugs. these guns are more useful than the write up's i have see in UK. Under UK law 90% of the guns may only be used on range. I also have 2 winchester 1873, 44 40 smooth bore ( yes on SGC ) and a 44 40 yellow boy 1866 also on SGC. Imagine the fun on private land you can use all these on with SGC. Since slugs are not permitted , buckshot are fun to. Buy them at any cost. But never seen on for sale under 500 pounds. Paid 900 pound for one from this site.

they are so great, I have 5 of them, and two Uberti .44 40 smoothe bore lever action.

Its a great gun( the gun in question above) took two bunnies and few tin can at 30 yards. Cans were to sight it in and now sitting with the other 9410 in the gun case. Love them, Get one or I will. pal

!/ Remove tube, 2/ Clean and silver solder over the crimp area. 3/ Silver solder thin collar over the crimp. ( very thin layer) 4/ Smooth over the soldering and collar. ( remember it will not be seen, you can do this your self, ) 5/ Put a suitable size drill down the tube ( you will only be remove very little metal so no great drill needed. even one for drilling into walls will work just fine. Make friends with the cable man for his drill bit ) drill slowly. 6/ replace the tube ( may need a new spring if the original was cut to size, any spring that works is fine to extend the length) You may find that mag tubes are welded on for proof house in UK, for that you will need to work with the tube left on and a longer drill needed. Also check to see if you need to have it reproofed to stay within UK law. Man the hunter