jeffo223

Out of all the moderator's I have tried the scirocco was by far the worst, even the shop could not believe what had happened to the internals. Paul

Cal, what I mean is that all the aluminium moderator's I have used have rotted/ worn away due to the blast of the 17hmr. My old moderator the wildcat whisper had a stainless steel blast piece first surrounded by a aluminium dish, I aluminium dish has started to corroded on that as well but the stainless is perfect, that's why I would be weary of the hardy aluminium moderator's. I use my 17hmr alot so the moderator's do take some stick but are cleaned and looked after but as I have said I just want to pay for something once and once only.

I had a scirocco as well and after 50 rounds the 17hmr had destroyed the baffles and that was supposed to be the uprated one with stainless baffles. Not heard a hardy rimfire in action but I would be a bit sceptical about it's longevity due to it's construction. Paul

Tested against a dm80 and the onelesscharlie was smaller, would be longer lasting and a bit quieter and also cheaper :-) but no loss of quality. Paul

I would love to put some pictures up on here but I have not got a clue how to, sorry. Paul

Watch "Onelesscharlie 17hmr moderator" on YouTube There is a couple of other videos as well including showing groupings. The other video that was posted earlier wss of a demo version and not the one I am using now. Paul

Sorry my mistake! It should be 13cm/ 130 mm long and 3cm/ 30mm wide.

I was like you, I wasn't expecting to make the 17hmr perfectly quite as that is not possible but it is a bit better than the bench mark that is the sak plus the fact it's going to last ALOT longer than a sak. Paul

It's a muzzle mounted moderator not a over the barrel design. The length of the mod is 130cm with a diameter of 30cm. Weight I have not got a clue as I have nothing to weigh it with sorry. Cost is £70 but costs can go down if other materials are used instead of stainless steel ie aluminum. The moderator has 6 baffles but because it's a custom build you could tailer it to whatever you want. Paul

Well it's taken nearly 9 months to finally get it sorted but I now have the finished article and it's GOOD. The moderator in question is a full stainless steel, including the baffles inside, muzzle mounted onelesscharlie moderator. I have had and tested quite a few moderator's including sak, ase, wildcat whisper and a dm80. All these moderator's are good but I wanted something that would last a lifetime and to be a TAD quieter than a sak and this final one of testing has ticked all the boxes. Before anyone say you can just keep buying a sak at £35 I want to buy once and once only. In my opinion and a few of my friends also agree that it's a bit quieter than a sak . Acurracy wise it's better than my current mod which is a wildcat whisper and that's a accurate mod on my rifle but this better. Build quality is 100%. Very pleased indeed. Paul

Hornady all the way for me. Paul

Either a wildcat whisper or the new onelesscharlie Full stainless which I now use, it's built to last and just a tad quieter than my wildcat. Paul

Sorry Johnny, The body is actually 12" tall. Regards Paul

Hello Johnny, The overall height is 21" and the rabbit itself is 11" tall. Regards Paul

On the way Regards Paul

Hello Tom, pictures sent to you. Regards Paul

Spanj, send me your email address and when I have enough metal to do a fox target I will let you know,costs would be around £120. Regards Paul

Sorry saddler I can't do a rabbit target in that rabbit shape but you could paint one of mine in those similar colours and it would look not far off. Let me know if you want to order a target . Regards Paul

Sorry it's for a 223 which is a small action

Selling my walnut sako 75 stock. It's in really good condition with no scratches or dents. Only selling because I fitted a custom thumbhole stock. Selling it for £65 inc postage Regards Paul

Cheers I'll try photo bucket and see what I can do. In the meantime if anyone wants any pictures just let me know your email and I will send them over. Telf, I still have not got any email from you do I can send some pics. Regards Paul

Theo, if you could do that would be good. What do you need from me. Regards Paul

Thanks theo, I will let you know when I have some fox targets done. Regards Paul

Hello telf, I have not received your email yet. Regards Paul

Theosmith, I can do fox targets but at the moment I don't have enough metal but if you send me your email I can email you when I have enough metal to do a fox target. Regards Paul