-
Posts
357 -
Joined
-
Last visited
Content Type
Profiles
Forums
Calendar
PW Shop
Posts posted by 00buck
-
-
someone sold an air rifle on there the other week ALL IN BITS 1 add for the barrel 1 for the stock etc
-
is this an ejecter
-
reloading for shotgunners is a good book by rick sapp 410 up to 10g lead / steel /slugs / buckshot
-
and getting a bad mark
-
good luck on ebay it will get taken off as you cant sell loaders on there
-
I have a 20g
-
Tesco were doing 10w,40 and 5w.30 for £3.00 4 ltrs it was auto lube
-
they will be fine I had a load from the late 40s and 1950s they were all ok & paper cases brass heads
how old would you say they were
-
yes they have a transfer box 2h / 4h /4l
-
braked a frame I was talking about to tow with my motorhome
-
can you tow a jimny on a a frame all wheels on the floor
its a 2001
some say you can and some say you cant
I don't have a hand book for it
-
I ran my d22 on cooking oil for 2 years on cold days it would start but did not go very well till it got warm
put a heater on the filter and in line still the same
then it started to play up would not rev over 2000 rpm
put new filter on blow out the fuel pipes still the same
went on the net found a forum and found there is a small filter in the top of the pump
not a easy job to see or get it out
in side the pipe fitting so I took it out it ran like a dream
I put a in line filter in the fuel line just before the pump
it will also run on 100% in the winter now
-
ok will give them a try
-
looked at them no good as its U.S. and Canadian orders only
thanks
-
you can hand load fibre wads or cork wads fine
and easy to adjust the load with them
-
pm sent I have some 410 bits for sale
-
I have used rio cases in 20g I think they had rio primers in them
they all went bang
-
410 resize ring
the primer cup & spring & pad
and the bar that takes the new type wad guide
-
where can you get mec parts from
for a 600jr
-
I am after the same
-
just got 1 with 12 and 410 die sets but no bottles
so I will give it a go for the 410
-
hi where can you get new shot and powder bottles from
for the mec 600 or can you get others that will do the job
can anyone help
-
I have a lee loadall for sale
-
eley vip 30g 5 shot
410 loader
in Wanted
Posted
you have pm