Search the Community

NOW SOLD £85 for job lot posted to mainland UK including: Neck turner tool body with cutter (£65), Power adapter(£31) , Power adapter handle (£16), Press adapter (£16) All you need to neck turn your cases by hand or with a normal power screwdriver - just add a calibre specific pilot (£17) and expander mandrel (£17) available from 1967spud.com I have pilots and expander sets available for 6MM and 6.5MM for an extra £20 per set. Full instructions and setup videos at: https://kmshooting.com/learn/ From the manufacturer: "The K&M neck turner has a very unique cutter adjustment mechanism that allows for a very precise cutter adjustment. This design incorporates very fine pitched threads of a screw within a screw concept which yields 0.002” cutter advance for each rotation of the adjustment nut. As a point of reference and comparison, a micrometer advances the spindle 0.025” for every revolution of the thimble. There are etched markers on the neck turner body around the circumference of the cutter adjustment screw hole placed every 30 degrees radially and as a reference, there is one punch mark on the face of the adjustment nut. When the adjustment nut is rotated one increment the cutter advancement is 0.0002”. You can drive the cartridge with the power adapter and proper shell holder by hand when the handle is installed or remove the handle from the power adapter and insert the ¼” hex stem into a cordless screwdriver."