sanding and protecting a wooden stock

[andrewjames]

i have sanded down a wooden stock,

 

i now want to apply a protective coating that wont impair on the matt finish i used.

 

what would be recommended for the job?

 

 

 

thanks in advance

[ace63]

i have sanded down a wooden stock,

 

i now want to apply a protective coating that wont impair on the matt finish i used.

 

what would be recommended for the job?

 

 

 

thanks in advance

First look on net for finishing kit you may get a good deal.You say you have put on a matt finish then it should only need a wipe over from time to time or a little natural wax polish (matt finish).IF sanded and bare wood you may wish to use a wood dye for colour but I have used matt or satin spray lacquer for the finish. Danish oil also ok you rub this in with a cloth and wipe off any surplus but takes a little longer to dry.

if gun is of a higher value go to a good trade decorator centre and look at sadolin pv67 twin pack varnish(used on boats-dances floors ect)

however last one I did all the prep and got the local french polisher to do the finishing cost about £40, NO JOKES ABOUT FRENCH POLISHING OR I MAY SEND IN THE MOTHER IN LAW !!!!!!!!!!!!

[JonnyR]

I use a blend of boiled linseed oil and Tru-oil. Little and often, gives it that 'oiled' finish and protects against dirt, rain etc.