andrewjames

Hi all,Wanted to bump this thread to see if any chance someone has seen anything since Christmas, but to also ask, as my fx2000 was in bits I still have some of the components that I can use to build another one.Parts I'm looking for are:Barrel,Cylinder,Breech.If someone has of bits lying around id love to get an airgun again. Condition of the parts doesn't matter as long as they function. Cheaper the better at this moment.Thanks all.

i live in a shared house, landlord wont allow me to put holes in the walls..

thanks everyone, also i have added a post to that group so thanks again for the heads up scarecrow best A.

yes sure ill join, whats the link? Best Andrew

yes pleasee!! its also worth noting, the fx2000 was in bits as i was resealing it so i have the internals here still.. (except a robert lane regulator which is still in the tube). thanks everyone really sucks to loose all my airguns at once. hope everyone tightens security were needed. Best Andrew

worth noting, the fx2000 was in bits as i was resealing it so i have the internals here still.. (except a robert lane regulator which is still in the tube).thanks everyone really sucks to loose all my airguns at once. hope everyone tightens security were needed.BestAndrew

Hello all, My house was ransacked in broad daylight approximately two months back, I've been periodically checking the internet to see if my airguns have surfaced but no luck so far, wanted to put the feelers out and ask around if anyone has recognised these airguns at all? - rws excalibre .22 with fx barrel shroud (defining feature) - had a gloss 3-9 efr leupold ontop. SERIAL: 04417 - FX2000 .22 in bits as I was stripping it to sort the seals out etc.. walnut stocks on both, one light, one dark. came in a large pelicase as seen in the photos. - walther lgv competition ultra .177 with 3d printed butt pad in a green case, had a mark on the left hand side of the cheek piece just underneath the riser and a mark on the nearest end of the barrel weight. SERIAL: BJ001080 - axsor gemini .177 with golden, lacquered walnut stock that had been professionally repaired at the pistol grip after suffering a crack. SERIAL: 004921 includes bunch of pellets, scope rings, moderators and other accessories like Harris bipod and such.. thanks all!

Hello all, My house was ransacked in broad daylight approximately two months back, I've been periodically checking the internet to see if my airguns have surfaced but no luck so far, wanted to put the feelers out and ask around if anyone has recognised these airguns at all? - rws excalibre .22 with fx barrel shroud (defining feature) - had a gloss 3-9 efr leupold ontop. SERIAL: 04417 - FX2000 .22 in bits as I was stripping it to sort the seals out etc.. walnut stocks on both, one light, one dark. came in a large pelicase as seen in the photos. - walther lgv competition ultra .177 with 3d printed butt pad in a green case, had a mark on the left hand side of the cheek piece just underneath the riser and a mark on the nearest end of the barrel weight. SERIAL: BJ001080 - axsor gemini .177 with golden, lacquered walnut stock that had been professionally repaired at the pistol grip after suffering a crack. SERIAL: 004921 includes bunch of pellets, scope rings, moderators and other accessories like Harris bipod and such.. thanks all!

whats the going rate for one of these scopes? ive got one here, nice glass and field of view..

i have one if youre still looking years later...

bump please

.22 they are

I have some spare 3d printed 8 shot magazines to fit the webley fx2000 here with me.. can offer them for £10 each which is less than half the cost of an aluminium one. pm for details

https://www.uttings.co.uk/p130790-leupold-vx-freedom-3-9x33-efr-rifle-scope-leu-175075/ as new condition with box and instructions. briefly mounted on an pcp airgun but never used inside or out. welcome to collect or can post at cost - must be tracked and signed for. £350.00

bumppp

Non Fac version of the webley fx2000 in .177 please if anyone sees anything would be greatly appreciated for the heads up Thanks all!

Hi, did you ever sell this? Regards Andy

any length considered, .177 to fit a 1377 crosman. thanks in advance Andy

I let him know where you are. Atb

One on the bbs forum

sold to alan cheers pal

open to offers

Open to part exchange for vortex pst 2.5-10 or leupold efr 3-9.

As new in box not even been mounted, comes with all the paper work, quality check info, bikini covers, battery etc and ofcourse the vortex lifetime guarantee.. Really nice glass and ret! http://opticswarehouse.co.uk/product...24-riflescope/ was bought this as a pressie but unfortunately its the wrong version. 30mm tmcq ret Capped turrets moa adjustment 350 posted (first class insured and signed for) Open to part exchange for vortex pst 2.5-10 or leupold efr 3-9. can post abroad, buyer can come and collect no probs contact for details -------------------- 301 bkl mounts in black - boxed, as new but lightly used 45 posted That's all folks