ioan Posted July 5, 2010 Report Share Posted July 5, 2010 This afternoon I foolishly decided to take apart my CZ 452 varmint 17HMR to make sure that the barrel was free floating, whilst taking the action out of the stock I must have knocked something on the trigger and a small ball bearing dropped out. I have taken the trigger mechanism apart but cannot find where this ball bearing goes. Any ideas? Cheers Ioan Quote Link to comment Share on other sites More sharing options...
ST3V3 Posted July 5, 2010 Report Share Posted July 5, 2010 (edited) manual my guess is number 23 Edited July 5, 2010 by ST3V3 Quote Link to comment Share on other sites More sharing options...
Redgum Posted July 6, 2010 Report Share Posted July 6, 2010 Its a bit late now but you only need a piece of paper to check if your barrel is free floating. Quote Link to comment Share on other sites More sharing options...
ioan Posted July 8, 2010 Author Report Share Posted July 8, 2010 Cheers for the replies. Fixed it now, I had checked the clearance with a piece of paper, but I thought I would be sure and sand a bit off. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.