adam f Posted August 2, 2010 Report Share Posted August 2, 2010 Need some help with the ejectors on my rizzini 12g.... they are double ejecting even after just one shot. Doesnt matter whether top or bottom barrell first. Ive cleaned and lubed them as best as I can without removing them and thought I'd fixed it as the first dozen or so shots they ejected perfectly.... but now back to double ejecting. It's something I could like with but I'd like to cure the issue. Any ideas? Do they just need a better clean? If so how do I remove them? Thanks Adam Quote Link to comment Share on other sites More sharing options...
quiteman Posted August 2, 2010 Report Share Posted August 2, 2010 Hi, i had the same on 525 Browning and it came down to ejector timing, cleaned work for a time and then went back to doing the same again ajusted ejector timings in the action in the end. hope this helps. Quote Link to comment Share on other sites More sharing options...
Graham M Posted August 2, 2010 Report Share Posted August 2, 2010 The Rizzini ejectors are different to the Browning in as much as they rely simply on spring tension. If you take the barrels off and have a look at the ejectors you may find that the small part that holds them prior to ejecting is worn. If this is the case you will need to get it sorted at a gunsmith. G.M. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.