one__shot Posted July 25, 2011 Report Share Posted July 25, 2011 just bought a new hw100 and there is a movment at the back of the gun it moves up and down around 4mm has anyone else had this problem Quote Link to comment Share on other sites More sharing options...
Andy75 Posted July 26, 2011 Report Share Posted July 26, 2011 Are you saying the action is moving independently to the stock? If so, there are two securing bolts in the underside of your stock. The one at the rear is most likely loose - it's a socket head cap screw, and should be quite tight. The forward bolt shouldn't be done up too tight, as it secures the support band for the barrel and air cylinder to the stock - I have found that having this done up more than a smidgen over finger tight results in erratic accuracy. Many people replace these with a version that only ties the cylinder to the stock, leaving the barrel fully-floating, which is a good idea. If it's not a loose stock bolt, then you may have parts of the inner action not secure - return it to the gunshop or a gunsmith to have it remedied immediately - high pressure air next to your face could turn nasty. Also might be worth calling Hull Cartridge? Hope this helps! Quote Link to comment Share on other sites More sharing options...
one__shot Posted July 26, 2011 Author Report Share Posted July 26, 2011 Are you saying the action is moving independently to the stock? If so, there are two securing bolts in the underside of your stock. The one at the rear is most likely loose - it's a socket head cap screw, and should be quite tight. The forward bolt shouldn't be done up too tight, as it secures the support band for the barrel and air cylinder to the stock - I have found that having this done up more than a smidgen over finger tight results in erratic accuracy. Many people replace these with a version that only ties the cylinder to the stock, leaving the barrel fully-floating, which is a good idea. If it's not a loose stock bolt, then you may have parts of the inner action not secure - return it to the gunshop or a gunsmith to have it remedied immediately - high pressure air next to your face could turn nasty. Also might be worth calling Hull Cartridge? Hope this helps! thanks for the info m8 and i am returning it to the gunshop tomo Quote Link to comment Share on other sites More sharing options...
Clubshot Posted July 28, 2011 Report Share Posted July 28, 2011 I have a HW100 - not right / correct Straight back to supplying Dealer - As they do not have Service Kits - AT Fitted My bet a return trip to Hull - As New Dealer might be able to issue a replacement BOB/R Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.