ratcatcher2250 Posted August 24, 2011 Report Share Posted August 24, 2011 Hi i have a crosman 2250 and the 2 screws that are in the stock are messed up no slot now to for a screw driver to turn i have got to replacement screw but can any one help me witch would be the easyest way and with out damageing my stock to get these screws out thanks Quote Link to comment Share on other sites More sharing options...
bruno22rf Posted August 24, 2011 Report Share Posted August 24, 2011 Try using a narrow centre-punch.Local engineering merchant should stock them or Ebay item no-200567827839 should do the trick.Punch a dent near the outer edge of the screw head and then tilt the punch over and tap the screw counter-clockwise.Use a small hammer and dont belt the living daylights out of it-good luck. Quote Link to comment Share on other sites More sharing options...
ratcatcher2250 Posted August 28, 2011 Author Report Share Posted August 28, 2011 Ill give that a go thanks Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.