blasterjudd Posted August 31, 2011 Report Share Posted August 31, 2011 I have a BSA scorpion T10 and noticed that sometimes the bolt action is becoming stiff when trying to load a mag or recycling the mag any suggestions or recommendations are welcome chaps??? Have noted this is not a regular problem and the bolt action is smooth with no mag in? Am about to try retentioning the mag as I had fitted new o rings which might have started this off when they both broke a seal? Looking forward to replies? Quote Link to comment Share on other sites More sharing options...
Clubshot Posted September 1, 2011 Report Share Posted September 1, 2011 Give John Bowkett a Call Not only fixes them but does offer advise as well Works from home - 01217454287 Has no time for internet or Boards BOB/R Quote Link to comment Share on other sites More sharing options...
lewj Posted September 1, 2011 Report Share Posted September 1, 2011 i hade problems with the mag not rotaing prop so i cocked the bolt a alot harder to make it work, but once i done it to fast and cort the mag before it rotated properly and dameged then end of the probe,, i sent it back to bsa and they replaced it for me Quote Link to comment Share on other sites More sharing options...
blasterjudd Posted September 8, 2011 Author Report Share Posted September 8, 2011 Cheers boys Went to my local gunsmith today leech & sons in Boreham Essex a really good gunsmith he is, told me it's the new o rings are probably thicker being new and just need spraying with silicone and all will be fine. Tried it tonight and he was spot on all sorted now. Thus cheers Dave Poole topman you know your stuff I will recommend leech & sons to u fellas. Nice to know a knowledgable gunsmith. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.