Matt Gould Posted January 6, 2012 Report Share Posted January 6, 2012 hello just brought my self a right handed whinchester sx3 but i am left handed does anybody know if you can swap the safety catch button over so its safe the other way ?? Thanks Matt Quote Link to comment Share on other sites More sharing options...
Schern Posted January 6, 2012 Report Share Posted January 6, 2012 Yes you can. Instructions are in the instructions. You can download the full set from the US site. Quote Link to comment Share on other sites More sharing options...
Matt Gould Posted January 6, 2012 Author Report Share Posted January 6, 2012 Yes you can. Instructions are in the instructions. You can download the full set from the US site. can you send me a link for the website ? Quote Link to comment Share on other sites More sharing options...
Schern Posted January 7, 2012 Report Share Posted January 7, 2012 http://www.winchesterguns.com/customerservice/ownersmanuals/index.asp Quote Link to comment Share on other sites More sharing options...
Schern Posted January 7, 2012 Report Share Posted January 7, 2012 Just had a quick scan of the manual and it doesn't give instructions. Found this on another forum. "Once the trigger assembly is out you pull out the hair pin and slide the safety out. You then pull out the small pin and replace the small pin on the opposite side. Put the safety in backwards and put the hair pin on the opposite side." Quote Link to comment Share on other sites More sharing options...
Matt Gould Posted January 7, 2012 Author Report Share Posted January 7, 2012 Just had a quick scan of the manual and it doesn't give instructions. Found this on another forum. "Once the trigger assembly is out you pull out the hair pin and slide the safety out. You then pull out the small pin and replace the small pin on the opposite side. Put the safety in backwards and put the hair pin on the opposite side." okay thanks matey, does the manual tell you how to get the trigger assembly out ? Quote Link to comment Share on other sites More sharing options...
BlaserF3 Posted January 7, 2012 Report Share Posted January 7, 2012 (edited) Duplicated the manual so edited post. Edited January 7, 2012 by BlaserF3 Quote Link to comment Share on other sites More sharing options...
Alanl50 Posted January 7, 2012 Report Share Posted January 7, 2012 (edited) if you PM me your email ILL send you the SX3 manual one armed Alan Edited January 7, 2012 by Alanl50 Quote Link to comment Share on other sites More sharing options...
Schern Posted January 7, 2012 Report Share Posted January 7, 2012 okay thanks matey, does the manual tell you how to get the trigger assembly out ? Yes, it does. Basically strip down the gun, remove the bolt handle and bolt from the action and then use the bolt handle to drive the two pins out of the action. They can be a bit tight if it's a new gun. Once they're out just pull the trigger guard down and the whole lot should come out. Quote Link to comment Share on other sites More sharing options...
BlaserF3 Posted January 7, 2012 Report Share Posted January 7, 2012 It's a lot easier to buy a parallel pin punch to tap the pins out, it will last a lifetime and be suitable for stripping most auto's. I recently bought a new 391 and there was no way the trigger pin would have come out without the punch and a small hammer. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.