Guest jonrms Posted July 2, 2006 Report Share Posted July 2, 2006 :blink: Firstly top of the line chrono used...... but must be faulty...all data entered... pellet weight etc... 1) AGS PCR1 10.12 lbs pressure... 2) Logun solo 11.28 lbs pressure 3) Stealth mk1 3.6 lbs pressure 4) Logun S16 2.52 lbs pressure. then changed the pellet.... to a bisley... which was over 20g... pressure dropped badly on all .... but stayed in about equal proportions... I only used a RWB hallow point.... which was weighing in at 10.20 ... so not sure *** is going on... gonna see my local gun smith and find out..... pistol used... which can take rabbits down at about 15-20 yards.... only showed as 2.41lbs pressure... hmmmmm what do you guys/girls think... Quote Link to comment Share on other sites More sharing options...
Bipolar Posted July 2, 2006 Report Share Posted July 2, 2006 Sounds like faulty chrono get it checked out :blink: Quote Link to comment Share on other sites More sharing options...
dunganick Posted July 2, 2006 Report Share Posted July 2, 2006 :blink: Firstly top of the line chrono used...... but must be faulty...all data entered... pellet weight etc... 1) AGS PCR1 10.12 lbs pressure... 2) Logun solo 11.28 lbs pressure 3) Stealth mk1 3.6 lbs pressure 4) Logun S16 2.52 lbs pressure. then changed the pellet.... to a bisley... which was over 20g... pressure dropped badly on all .... but stayed in about equal proportions... I only used a RWB hallow point.... which was weighing in at 10.20 ... so not sure *** is going on... gonna see my local gun smith and find out..... pistol used... which can take rabbits down at about 15-20 yards.... only showed as 2.41lbs pressure... hmmmmm what do you guys/girls think... as far as im aware its illegal to shoot an animal with any gun producing under 6ftlb of power (so basically a pistol.... as thats the legal limit for an air pistol) Quote Link to comment Share on other sites More sharing options...
Guest jonrms Posted July 2, 2006 Report Share Posted July 2, 2006 I am really not sure.. must be faulty but had shown consistant marks on each gun..... so shot 4-6 shots on each.. and the chrono said near enough the same... hmmm. then switched pellets and they were consitant with the more weight... the fps dropped with the heavier pellets along with with lbs of pressure... for the record.. i never shot a rabbit with a pistol... just fyi.. before it kicks off on the forum... but i know someone who has. Quote Link to comment Share on other sites More sharing options...
pin Posted July 3, 2006 Report Share Posted July 3, 2006 Sounds like the crono is out of callibration, if it shows proportional results (which is has) but they are way off what you would expect, it needs to be re-callibrated. Quote Link to comment Share on other sites More sharing options...
Guest jonrms Posted July 3, 2006 Report Share Posted July 3, 2006 I am sure there is a problem with my pcr1 anyway...... so thats going back again.. to logun.... and they are finally swapping it for a solo...... will have to check that the s16 is ok... think there is a air leak around the bottle..... so some pcp tape will do.... god only knows why i am having so much problems with the stealth.. but there is a life time guarentee on them so that might need to go back....... local gun smith will tell me. :blink: Quote Link to comment Share on other sites More sharing options...
dr_nick Posted July 3, 2006 Report Share Posted July 3, 2006 I am sure there is a problem with my pcr1 anyway...... so thats going back again.. to logun.... and they are finally swapping it for a solo...... will have to check that the s16 is ok... think there is a air leak around the bottle..... so some pcp tape will do.... god only knows why i am having so much problems with the stealth.. but there is a life time guarentee on them so that might need to go back....... local gun smith will tell me. :blink: With the stealth its important to make sure you pull back the cocking handle and then secure it over to the left or right. Also make sure you dont over fill the air cylinder else it won't let enough air out. Quote Link to comment Share on other sites More sharing options...
Guest jonrms Posted July 4, 2006 Report Share Posted July 4, 2006 I am sure there is a problem with my pcr1 anyway...... so thats going back again.. to logun.... and they are finally swapping it for a solo...... will have to check that the s16 is ok... think there is a air leak around the bottle..... so some pcp tape will do.... god only knows why i am having so much problems with the stealth.. but there is a life time guarentee on them so that might need to go back....... local gun smith will tell me. With the stealth its important to make sure you pull back the cocking handle and then secure it over to the left or right. Also make sure you dont over fill the air cylinder else it won't let enough air out. I have done all that.. I have the MK1 version of the stealth.. I have moved the top hat up and down the slide but its only making marginal differance.... from factory settings it should be aprox 1 1/2 turns from fully down... this should produce 12lbs aprox of pressure... when i did that it didnt even make the pellet go 10 feet... then I moved it out.. the best I was able to achieve was at 6lbs of pressure.. I was really worried... :blink: This rifle shoots well but is recording so low on the scales. I have to really get it tested elsewhere ... And double checked for possible ware on some O rings etc.... the pcr1 is rubbish gun. ( I think) and for the record... because I had that many replacements..... I have alot of filling adapters .. that clip to the rifle... so if anyone wants them when I send the gun back.. let me know.. you pay the P+P thats all... but will put that bit on the for sale side of things.... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.