gunboot Posted June 26, 2012 Report Share Posted June 26, 2012 Hi can anyone explain how to remove the bolt fom a BSA scorpion pellets stuck in barrel near to the silencer so I think the best way of removal is to rod them from the bolt end. Quote Link to comment Share on other sites More sharing options...
Wharf Rat Posted June 26, 2012 Report Share Posted June 26, 2012 Rodding from the bolt end makes them stick all the harder. Rod from the barrel end. If it could pass through the way it was going it would have done already. Quote Link to comment Share on other sites More sharing options...
NIGHT SEARCHER Posted June 26, 2012 Report Share Posted June 26, 2012 Rodding from the bolt end makes them stick all the harder. Rod from the barrel end. If it could pass through the way it was going it would have done already. Your Barrel is more than likely choked the last 4 or 5 inches so if its jammed now the only way out is back so rod it from the Silencer end if that fails take it to a gunsmith or send it to BSA. I mate of mine got 3 pellets stuck in the Barrel of his Super 10 and even BSA couldn`t sort it out he finished up with a new Barrel £120. Quote Link to comment Share on other sites More sharing options...
gunboot Posted June 26, 2012 Author Report Share Posted June 26, 2012 Im wondering exactly what has caused this the gun came in blocked! Could it be a low charge and not enough pressure for the pellet to clear the Barrell? I suspect there is more than one up there! Quote Link to comment Share on other sites More sharing options...
gunboot Posted July 2, 2012 Author Report Share Posted July 2, 2012 Finally cleared barrel had to warm it up slightly using a hot air gun a squirt of silicone spray up the bore and slowly fodder them out Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.