shugmcm Posted October 5, 2013 Report Share Posted October 5, 2013 hi, I was wondering where I can buy screw on fitment that's sits inside the cooler integrated into the bottom of the radiator for the transmission piping, (tap) it isn't screwing on as the threats are gone ive already paid someone to fix this and by god all they done was put plumb tape on and just stuck it on with glue, and I broke down, cant wait till Monday when I see about that, Quote Link to comment Share on other sites More sharing options...
four-wheel-drive Posted October 5, 2013 Report Share Posted October 5, 2013 It may not be the same but when I got a new radiator for my jeep we found that at the bottom it had a push on connector for the auto oil pipe and it was the wrong size what he did in the end was to cut the end off the flexable tube and just push it on and put a clip on it worked for me but yours may be different. Quote Link to comment Share on other sites More sharing options...
shugmcm Posted October 5, 2013 Author Report Share Posted October 5, 2013 No that wont work pal. Its a round thing that sits inside the unit with threats, then u screw the metal pipe tap onto it, then the rubber piping goes on and gets clipped. It wont sit inside or thread on to coupling as its worn Quote Link to comment Share on other sites More sharing options...
shugmcm Posted October 5, 2013 Author Report Share Posted October 5, 2013 Any ideas anyone. Quote Link to comment Share on other sites More sharing options...
tinkertaylor Posted October 6, 2013 Report Share Posted October 6, 2013 hi don't no if this will help but google milner of road I get all my parts from there so maybe if u ring them up they might point u in the right direction Quote Link to comment Share on other sites More sharing options...
ROBLATCH Posted October 6, 2013 Report Share Posted October 6, 2013 helli coil might be worth a go if you can still get them used them years ago when the threads went on an alloy block to put spark plugs in helli coil might be worth a go if you can still get them used them years ago when the threads went on an alloy block to put spark plugs in this is them https://www.google.co.uk/search?q=helicoil&tbm=isch&tbo=u&source=univ&sa=X&ei=OxFRUvObDJGVhQeviIGgBw&sqi=2&ved=0CFEQsAQ&biw=1366&bih=643&dpr=1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.