deadeye ive Posted February 14, 2007 Report Share Posted February 14, 2007 Pin It seems just when I solve one problem another appears and I type this request via someone elses computer ..Basically I have lost my line ........The test results are as follows TEST IS FAILED:CO modem did not respond to OAM cells frm RT modem. Possible causes 1,The set of OAM VPI/VCI does not match with the ones at CO side. 2,OAM Loopback type is not proper type Remedies 1,Check the VPI?VCI and use the correct values 2,Check the OAM Loopback type and use the proper type . Can you put this into English so a fick ****** like myself can understand (Layman Terms ) Thanks Ivan Quote Link to comment Share on other sites More sharing options...
garyb Posted February 14, 2007 Report Share Posted February 14, 2007 Either the link is dead - Does a phone plugged into the line have dial tone ? Or your modem / router isnt properly setup. But if it's worked in the past, and no one has changed anything - Id go with the above, else... Confirm that it is set for these settings VPI, VC = 0/38 PPPoA VCMux Auto Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.