supadonk Posted February 19, 2016 Report Share Posted February 19, 2016 Hi , I have a leak on a pre 06 s410 it is on the male snap connector S470 I am having no success in removing it and I am having difficulty in holding the cylinder whilst trying to undo the 17mm connector any ideas on holding the cylinder without damaging it As it will be stripped, I had just as well replace the cylinder o rings as well RN 234 muchio gracius, the donk . Quote Link to comment Share on other sites More sharing options...
kody Posted February 19, 2016 Report Share Posted February 19, 2016 pair of rubber gloves to get a bwtter grip Quote Link to comment Share on other sites More sharing options...
evo Posted February 19, 2016 Report Share Posted February 19, 2016 Hi , I have a leak on a pre 06 s410 it is on the male snap connector S470 I am having no success in removing it and I am having difficulty in holding the cylinder whilst trying to undo the 17mm connector any ideas on holding the cylinder without damaging it As it will be stripped, I had just as well replace the cylinder o rings as well RN 234 muchio gracius, the donk . put the cylinder between two pieces of wood, 2x1 then tape it up to keep it solid, then place the two pieces of wood with the cylinder in the middle into a vice and you can then remove whatever you want, I have just totally rebuilt my s410 and found that the number one place for leaks on them is around the air gauge good luck with it as they are a cracking piece of kit, the one I have just rebuilt is now like new and is an excellent rat stopper atb Evo Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.