hankook1 Posted December 10, 2016 Report Share Posted December 10, 2016 hi all, I have recently purchased a new lee load-all 2 reloader to start reloading 12 gauge cartridges I bought maxam psb+2 powder and #5 shot to load 36 gram loads in a 70mm cartridge on the maxam bottle it say I need to charge this load with 1.85 grams of powder which is I believe 28 grains so I put the largest powder bushing which come with the loadall kit which is numbered 198 in the loadall charge bar but it only drop 24.5 grains of powder when weighed on scales, have anyone got any suggestions please as I don't know if lee make a larger bushing.. Quote Link to comment Share on other sites More sharing options...
HunterBen Posted December 10, 2016 Report Share Posted December 10, 2016 I had this problem .I took one of the small bushings and drilled it out a little at a time till I got the drop I needed.possibly not the easiest solution Quote Link to comment Share on other sites More sharing options...
hankook1 Posted December 10, 2016 Author Report Share Posted December 10, 2016 thanks for that hunter ben I thought that might be the solution to the problem, just didn't know if they made a bushing larger than the 198 you get in the set when you buy it new seem to me maxam psb2 powder is very light in weight compared to others made in the usa ... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.