SaxJon Posted August 1, 2018 Report Share Posted August 1, 2018 Hi Guys, Took my Hatsan for a little clay bashing last week and after taking it apart for a good clean noticed cracking on the SMART Valve (See Part: 812) where the Action Bar connects. I took this back to my local store and they have agreed to replace the Smart Valve however im wondering if this is normal or what could have caused this to happen? Quote Link to comment Share on other sites More sharing options...
fse10 Posted August 2, 2018 Report Share Posted August 2, 2018 Part 908 is the smart valve. Only issue i keep having with mine is part 811 the action bar which has snapped & been replaced three times now due to same issue. So will get it repaired for the fourth time & out it. Quote Link to comment Share on other sites More sharing options...
SaxJon Posted August 2, 2018 Author Report Share Posted August 2, 2018 4 hours ago, fse10 said: Part 908 is the smart valve. Only issue i keep having with mine is part 811 the action bar which has snapped & been replaced three times now due to same issue. So will get it repaired for the fourth time & out it. Hi FSE10 Part 908 is the Smart Valve Piston but either way is your gun a magnum ? and do you have the same assemble of action bar (Part 811) and smart valve (Part 812). If so how much play do you have when assembled between the Smart Piston and Smart Valve ? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.