enfieldspares Posted October 7 Report Share Posted October 7 I have now photographed the thing. There are six shot bushings the markings of which are, as far as I can decipher, 1oz, 1 1/4oz, 1 1/?, Redding D, Redding B and a second Redding B. So six in total. There are thirteen powder bushings, marked, as far as I can decipher, 2, 3, 5, 6 (two of these), 7, 9, 10 (two of these), 12 (two of these), 16, 17. There is the one charge bar only. I have taken this out to show it against the bushings and photographed it. The crimp is alas, a six fold crimp. the wad guide has all its petals as far as I can seen and there is a spare set of petals as shown in the picture. The shell carrier is shown with a 70mm cartridge in place and the measurements in the vernier are 55.42mm or 2.183". I would like to sell the thing. There is a spare rubber washer for the bar and, as seen, the original two rubber washers are in place on the machine. There is also one spare shot bottle (without screw cap) that I have not photographed. It is as with the other dirty grey inside. I would be looking at around £185 posted or £175 collect as the additional value is, of course, in the extra bushings for the powder and shot and the spare wad fingers. I would consider reasonable offers. Pictures are attached here. Please let me know with a yes or a no and if no I will list it on PW with a price of £195 sent or £185 collected. FIRST TO REPLY HERE ON THE THREAD HAS FIRST RIGHT OF REFUSAL AND OFFER. Mylocation is use postcode LE9 2AL near J21 ofthe M1 at Leicester. Link to comment Share on other sites More sharing options...
Recommended Posts