Jump to content

AYA number 4


Recommended Posts

For sale:

 

AYA number 4 (side by side)

12 bore

Ejector

26" barrels

Choked: cylinder (RH barrel) and 1/4 (LH barrel)

15" stock (LOP to front trigger)

Good condition

Clear bores

Tight, solid action

Slightly cast off for RH

S/N: 500614

 

Extra information:

 

The barrels have been reblued at some point and have a better finish than the original (thats my opinion). It has been well used but well looked after and maintained. The bores are clean and but a slight ring mark is noticable near the end of the left chamber (just before the forcing cones), but doesn't affect the gun.

The stock has been stripped and re-oiled when an extention was added to increase the stock length for me.

The mainspring was replaced in the left barrel (at the end of last year) as it had weakened producing the odd missfire. Now it fires perfectly on both barrels.

There is the odd mark and a scratch on the barrels (done by my friend when I lent it to him ) which I have tried to show in the pictures below:

Photo00021.jpg

Photo00024.jpg

Photo00022.jpg

Photo00025.jpg

Photo00023.jpg

Pic showing the rings inside the left barrel:

Photo00028.jpg

Slight pitting spots on the right barrel:

Photo00036.jpg

Scratch on the left barrel:

Photo00037.jpg

 

Any questions please ask.

 

£295

 

Cheers

Si

Edited by Si-Bore
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...