gixer1 Posted September 23, 2008 Report Share Posted September 23, 2008 (edited) Folks, I recently bought a bushnell trail sentry and cannot get it to take pictures, i have switched it on and set the time, date and sunrise and set times, i then push and hold the "menu" button as per the instructions and "0200" comes up on the display, it then changes to read "8758" with a picture of a camera, a sun but it doesn't take photos, if you wave your hand infront of it the display shows "EUNR" and sometimes "RECD" but still there is nothing on the card also it has shown "Snap" but still NO BLOODY PICTURES!!!!!!!! can anyone help with this as both Cabellas and Bushnell don't seem to be able to help, can someone give me a step by step guide in layman terms?? Also the SD card is formatted in FAT (default) mode but there is also the option of FAT 32 and NTFS....this is the SD card that came with the camera and is a 128mb and the lock is turned off.... Thanks Garry. Edited September 23, 2008 by gixer1 Quote Link to comment Share on other sites More sharing options...
drut Posted September 23, 2008 Report Share Posted September 23, 2008 I had problems with a 11-9202 earlier in the year:would not write to the SD card after working OK for a few weeks & exchanged by Cabela's(Excellent service).While faffing about swopping SD cards I found similar nos displayed as yourself.I am now paranoid & format the SD cards in FAT using SDFormatter v2.0.0.3 with the format size adjustment turned on and have had no problems with the second camera,having said that it is nowhere near as sensitive to movement as the first camera. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.