ziplex Posted October 9, 2008 Report Share Posted October 9, 2008 Advice please..........my new M2's chokes drop in and out the end of the barrel without problem except the 1/2 which binds and needs a bit of effort to get it seated down to where the thread starts, it will tighten down but there is a bit of resistance, couldn't hand tighten it. When taking the thing out it is equally tight and a pain to remove, hence i've left 1/4 in there. Perservere or back to the shop with the offending tube?? Quote Link to comment Share on other sites More sharing options...
throdgrain Posted October 10, 2008 Report Share Posted October 10, 2008 Your choice. It will probably be fine but only you can really tell. Me I've always left 1/4 in mine anyway Quote Link to comment Share on other sites More sharing options...
Baldrick Posted October 10, 2008 Report Share Posted October 10, 2008 I noticed problems with the quality of the machining on some of the chokes on my M2. I just stick with 1/2 choke in mine though. Quote Link to comment Share on other sites More sharing options...
ziplex Posted October 10, 2008 Author Report Share Posted October 10, 2008 I never had a tight fitting choke before so was a little unsure, it's almost as if it's oversized slightly and was worried it might get stuck in there! Best get it changed I 'spose....just happens to be the choke I prefer in the semi. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.