tomtommckinnon Posted January 24, 2009 Report Share Posted January 24, 2009 does anyone with an escort magnum have it on a sling? if so how did u attach it?? mine didn't come with the sling swivels... cheers Tom Quote Link to comment Share on other sites More sharing options...
sbald Posted January 24, 2009 Report Share Posted January 24, 2009 I fitted one to mine. The end cap screws off and is replaced with one that has a swivel attached, the other swivel was drilled and fixed to the stock with Araldite (synthetic stock). With neoprene sling the bits cost £30 and I find it very useful. Quote Link to comment Share on other sites More sharing options...
codling99 Posted January 24, 2009 Report Share Posted January 24, 2009 i screwed one sling into pisto; grip, and other end i undone the strap and threaded it through the rib on barrel. Quote Link to comment Share on other sites More sharing options...
tomtommckinnon Posted January 24, 2009 Author Report Share Posted January 24, 2009 where do u get an end cap that has a swivel attached? is there any other way of puting in the pistol grip swivel into an synthetic stock with out glue? will it just screw in? Tom Quote Link to comment Share on other sites More sharing options...
Markio Posted January 24, 2009 Report Share Posted January 24, 2009 Wondered this myself recently. Using the the pistol grip is a fair idea, wonder if you could use a typical plaster board type rawl plug that's meant to expand into voids. I've also seen the end cap with swivel attachment but nor sure where. I'll see what i can find. Quote Link to comment Share on other sites More sharing options...
Spaniel Posted January 24, 2009 Report Share Posted January 24, 2009 I was going to ask the same question last week.... I have seen some slings for sale which slips over the gun but im not sure about these The end cap with swivel i have only found on the american Capella web site so far Quote Link to comment Share on other sites More sharing options...
codling99 Posted January 24, 2009 Report Share Posted January 24, 2009 mine held into pistol grip ok,tight too.other end just thread through rib,sorted,lasted me 2 years before i sold gun Quote Link to comment Share on other sites More sharing options...
sbald Posted January 24, 2009 Report Share Posted January 24, 2009 I asked my local gun shop and he had an end cap in stock, the screw in one is a standard item I was advised to fit it with Araldite but I,m sure it would hold without. You could also try a swivel which fits around the barrel. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.