prem1234 Posted April 19, 2015 Report Share Posted April 19, 2015 (edited) Hi Guys, I Put a Yukon XT on my HW100 with Sports match high mounts but i can't Zero the scope....It's shooting about an Inch low at 25m and I've lowered the digital cross hairs as low as they can go..... Was thinking my only options were to buy two 'step ups/raising blocks or bite the bullet and buy some adjustable mounts but the only ones I've found for a 30mm tube were £50-£60.... Any ideas or recommendations ? Thanks in advance Dave Edited April 19, 2015 by prem1234 Quote Link to comment Share on other sites More sharing options...
rodp Posted April 19, 2015 Report Share Posted April 19, 2015 (edited) Shim the rear mount. Have you tried swapping the mounts round, front to rear ? Edited April 19, 2015 by rodp Quote Link to comment Share on other sites More sharing options...
FalconFN Posted April 19, 2015 Report Share Posted April 19, 2015 Use a metal shim between the bottom of the scope and mount. I have used a strip (or two) cut from a beer can. I'm a bit confused as to whether it is shooting low or aiming low? If you are having to move the cross hair higher then you should shim the front mount, if you are shooting low then shim the rear mount. Quote Link to comment Share on other sites More sharing options...
rodp Posted April 19, 2015 Report Share Posted April 19, 2015 OP says shooting low. I've used a strip cut from plastic washing up liquid bottles in the past, no rust or corrosion and doesn't scratch anything. Quote Link to comment Share on other sites More sharing options...
prem1234 Posted April 19, 2015 Author Report Share Posted April 19, 2015 (edited) Great thanks guys that sounds good I'll give it a try.....Yes my post was not the clearest....the rifle is shooting low...I'll swap the mounts round and if still the same then pack out the rear one. Thanks again for your replies Edited April 19, 2015 by prem1234 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.