antlerman

hi all i have one of my NSK's ( neck survival knives for sale, it is made from laser cut 3mm 01 tool steel and has a rolled finish and is heatreated to 59 rockwell. It has a walnut handle with brass tube and pins and a mosaic pin in the centre and has black vulcanised fibre liners and a scandi zero grind. The knife is 158mm long by 25mm wide. here it is close up of the blade texture this has no sheath and im looking for £45 + £5 postage many thanks alex

thanks mate and yes i like the rolled finish, looks good against a polished edge and it is easy to maitain, i make my mosaic pins myself but im sure you can buy them on brisa if you google them and please post pics of the knife finished with the sheath. And i have just finished a NSK blade today and have a GPK underway so just pm me when you would like a blade. many thanks alex

hi all i thought i would show you a few bits that i have been doing recently. I have recently got two of my knife designs laser cut and have handled one today. The blanks are cut from 4mm rolled 01 tool steel and have been professionally heat treated. feedback would be great here they are top blank is my new neck survival knife ( NSK ) and second one down is my general purpose knife ( GPK ) this one is a handled NSK with a nice walnut handle with brass pins and tube and a brass and copper mosaic pin with a razor sharp zero scandi grind, the handle just needs some final sanding then a coat of oil and then a buffing session then it will be done and up for sale. do not have the dimesions now as i cant find a ruler but will put them up tomorrow. i have left this one with a scale rolled finnish on it from the laser cutters but any finnish can be done. many thanks Alex

The five antler bits have now sold just the pair left, make me an offer Many thanks Alex

hi all i also have this little neckmuk for sale made from 01 tool steel fully heat treated and has a scandi grind and is 193mm long by 34mm wide and has my stamped makers mark of my initials on this one "AM" im looking for £22.50 including postage for this one

hi all i have 2 knives for sale made from a file and en45 steel first up a small covexed knife made from heat treated en45 steel 240mm long and around 2mm wide with a burl wood and antler handle with a nickel silver bolster and black fibre spacer it is a little rough and has a bit of glue on the front bolster that needs to be sanded off. im looking for £12 for this + £4 postage next up is a file knife this knife is fully heat treated made from a file and is 3mm thick and 180mm long with a sapele handle scales and a copper lanyard hole and leather thong.with a scandi grind. im looking for £32 inlcuding postage for this both need a little work on the edge

i'll just have a look in the workshop for you then i will drop you a pm mate. many thanks Alex

i will also consider sensible offers many thanks alex

hi all i have some red deer antler for sale first up is a nice medium set of cast red deer antlers 2 6 point antlers about 60 cm long they weigh around 1.5-2 kg's with a few scuff marks as shown in photos and comes with free buffalo horn that can be seen in the pictures. im looking for £40 for these plus £10 postage i also have some bits for stick making all red deer antler 1 red deer coronet £4 + £2.00 postage 2 red deer coronet £4.50 + £2.00 postage 3 red deer curved handle, has been sanded to shape £4 + £2.00 postage 4 red deer fork £ 4 + £2.00 postage 5 red deer fork £3.50 + £2.00 postage many thanks alex

well done mate that looks really good, top quality work there and im glad you like the blank. Alex

very nice work, mick well done alex

first blade sold pending funds

pm replied too mate

oh and i forgot to add that handles can be added for an extra cost if you are looking for a complete knife, just pm me.

hi all i have for sale 5 knife blades 4 stock removal and 1 forged blade made from 01 and en45 and file steel here is the first a blade from 01 tool steel fully heat treated with a scandi grind 190mm long by 37mm wide with 6.5 mm pin holes im looking for £25 including postage for this one next is a file knife blade fully heat treated with a scandi grind and is 193mm long by 32mm wide im looking for £18 including postage next up is a forged knife blade from en45 steel fully heat treated with a stick tang small flat scandi bevel blade 220mm long by 34mm wide im looking for £22 including postage for this one next up is a neckmuk made from 01 tool steel fully heat treated and has a scandi grind and is 193mm long by 34mm wide and has my stamped makers mark of my initials on this one "AM" im looking for £25 including postage for this one and last up is a knife blade made from 01 tool steel fully heat treated, it has a scandi grind and is 192mm wide by 39mm wide and im looking for £25 for this one including postage only for sale to people over 18 many thanks alex

number 1 also sold pending funds, only one left now many thanks alex

number 3 sold pending funds

hi all i have three handmade 01 tool steel knife blades for sale all hardened and tempered they just need a handle added first up 3mm 01 tool steel 190mm long by 38mm wide fully heat treated with a scandi grind it has 6.5mm holes for 6mm pins im looking for £25 including postage for this next up made from 3mm 01 tool steel and is 180mm long by 38mm wide and is fully heat treated with 6.5mm holes and finally made from 3mm 01 tool steel fully heat treated 190mm long by 36mm wide with 6.5mm holes and im looking for £25 each for these including postage many thanks alex

no problem joe

hi joe try either tandy leather or leprevo for the leather mate

nice one mate very good

hi all price drop on this im looking for £40 including postage many thanks alex

thanks olly glad you like them

and last picture number 1 sold pending funds

first picture number 3 and 4 sold pending funds