snarepeg

Shuttle bar to fit single stage mec, variable shot end but powder bushings still required for powder. I believe this will also fit BOWMAN and some PACIFIC models, used but still good working order. There are 2 surface cracks wich may be from the moulding about 1/8" but the unit is sound and works 100 per cent.£20 posted p/pal o.k

DAM DAM, SHOULD HAVE BOUGHT THE OTHER 6. john

Yes. Yours mike. john

Back up for sale, john

Sold sold thankyou all. john

Still clearing out and came across this. LEE LOAD ALL JUNIOR. still in its box with all paperwork and fittings, never been assembled. Says on the box for 2and 3/4" and 3" cartridges in 12 guage, shot and powder charts for American powders and loads also. Use or display.£25 posted, no offers. john p/pal ok

LITTLETON PAN. SOLD .thanks. john

Replied to. john

You make em, i/ll shoot em john

Were they feeding on a FLOCK mattress?? JOHN

Have a LITTLETON shot pan ,( no drippers). Have gone to a home made gas job with 20 drippers so this spare, (this does not include the base and electric ring) made of cast alloy with 6 dropper holes and hole in centre of pan for attachment to frame, great for anyone with a LITTLETON to have as a spare or different shot size change,£30 posted john

2x20 and 3x16 guage heads with ZYTEL spigot for use in electric drill/ £15 posted. john

Ihave one in .25 and wouldnt part with it. You are looking at about 40 shots a fill, a nice light easy to use rifle. Pricewise?? good condition, no leakes, scope, about £125, make sure it comes with the fill adapter. john

Have fitted ZYTELrod into these heads and they work fine in ELECTRIC DRILL , these are new/old stock still with packing grease on them. Have 2x20 guage. 3x16 guage. £15 Posted each. 10 guage with correct fitting,£20 p/pal fine. john

Had my REMY 870 in 410 for 30 years and woudnt part with it, you can shoot from 2/2.5/3" cartridges without the worry of will it recoil. Also have one in 12 guage, fun to shoot and a talking point on the clay layout , john

Replied to, these are for use in an elctric drill. john

Have just found these and surplus to requirement. Lyman roll turnover set, shaft with threaded head and the following guages to fit. 410 HEAD. 20 GUAGE HEAD. 16 GUAGE HEAD. 10 GUAGE HEAD. have lent the 12 guage head out and dont expect it back, but i will add a second 16 guage that can be turned out on a lathe to 12 guage, £50 posted p/pal ok. john

Doncaster. john

Have a ponsness/warren elite rotary loading press in 28 guage, with papers/manuals etc in excellent condition. Comes with lots of GOODIES wads primers powder etc.Also 800b in 12 guage with same. £350 FOR 28 GUAGE. £275 FOR 12 GUAGE. Also a boxed conversion kit for 410 to fit the Elite£75. Can be picked up< or post at buyers expence but will not post primers or powder. john