snarepeg
Members-
Posts
1,115 -
Joined
-
Last visited
Content Type
Profiles
Forums
Calendar
PW Shop
Everything posted by snarepeg
-
Graham. Thats what i am stripping down now. Buffalo 32 gram fibre ssg. green@pink powder, 25 grain. john
-
Been useing the wifes nail varnish for years on this problem, give them a coat on the side to make them tight, (any colour), also handy for your hole in crimp to stop your shot dropping out?? john
-
As above, low shooting shim BACK mount. john
-
Sold to Karl, subject to the ussual. john
-
Could do with you marking my score card Allen p.s how big is your shed?? john
-
Have a LEE hand loader in 243 still boxed with papers and never been used or removed for that matter. £25 posted, p/pal ok. john
-
Nobel Sport GM3 powder in .410
snarepeg replied to discovery00's topic in Bullets, Cartridges and Reloading
I am using BLUE DOT,and have been for a lot of years, plus 700 catridges to a pound at 10 grains to 1/2oz of shot, i have used all the other 410 powders available but happy with this. john -
Tony. They work a treat, john
-
MEC now sold to OOPS, thanks . john
-
Two of us on this one, just had a frustrating hour with different pellets, s 10 in 177 and then tried bismags, astounded that a pellet change could do this, one hole groups and very very pleased am i. john
-
Thinning down on reloaders so up for sale is a . MEC junior in 28 guage, in tidy condition and ready to load, set up for 21 grams of shot but has a variable shot bar (shot side only). £80 Plus postage, some plastic wads included. john
-
Forget my idea, its a two piece cocking arm,should have gone to spec savers. john
-
It could be a slightly bent cocking arm, this could A not give full sear?bent engagement and B catch your piston has you snap the barrel up dissengageing it from the sear??? The rifle as a safety so it shouldnt go of, iff it is this? remove cocking lever place on a hard flat surface bend upwards and tap with an hammer in the middle, this should cure the problem iff it is that in the first place. john
-
Ponsness Warren wad guide wanted
snarepeg replied to pat 1's topic in Bullets, Cartridges and Reloading
Your welcome. john -
Ponsness Warren wad guide wanted
snarepeg replied to pat 1's topic in Bullets, Cartridges and Reloading
Posted Pat. john -
Ponsness Warren wad guide wanted
snarepeg replied to pat 1's topic in Bullets, Cartridges and Reloading
Pat. Can let you have a good secondhand one, F O C, send me your address. john -
Have a bowman thats been converted to 410, works fine, set up for half ounce loads and 14.5 winchester 296?. Bottles not the best but work o k. £50 pick up or post at cost, (this is heavy)photo by e mail. john Also shuttle bar for mec, adjustable shot end only.£25 posted
-
Iam on 90 percent used cooking oil filtered to 1 micron and 10 percent petro. Starts at touch of button in a morning and no problems, have changed oil filter twice and carry a spare, Pajeero 2800 turbo swb 95, going into my 3rd year. this is summer running, winter 70/30. john
-
Yes it unscrews, might be a tad tight, put an allen key in one of the holes in the brass to assist you, and you can get spare ones. john.
-
They have arrived, well pleased as they didnt have the card wads i asked for they have sent me the plastic overshot cards for the same money. john
-
Cannot find the dpd logo Graham, have tried every combination, got the tracking number from siarm but bartolni want a 7 digit senders code, mine is a 5 digit and it wont accept it. john
-
Not worrying about it not coming,just wanted an idea as to when it will get here for someone to be in. Ordered on the 14th said 2to 5 days so should be quite near i would think??. john.