rubyred

What fast powder would you recommend using vectran A1 at the moment. Thanks for your quick response.

So if I was reloading would need to reduce the amount of powder to be under subsonic.thanks for quick response.

Hi lads what is the difference between hushpower cartridge and normal cartridge is the hushpower slower than normal ones.thanks for looking

Very good will have to try fitting gopro like you have seams better than on head it gives me headache.

What is the point

Hi lads I am having trouble getting 55grain vmax but can get 55grain amax sent through the post what difference will they make to my shooting. I now they will not expande as much as vmax what is your Appian off them.

Hi I have just got some once fired cases on a mate in 223.I will full length die the first time and trim to size.After I have shot them I will neck size do I need to trim them to size every time I neck size.thanks.

Hi who is making drippers for sale please on here.thanks

Hi am using honrdy lock load gear with bullet that screws on the rod and copmarator with dial callipers.the two heads are 50grain serrai bliztking and 55grain vmax.the difference between the two marks using felt pen is 25 thou the serrai sticks out further so not a lot of head in case.I am not trying to make it completed but it is annoying which I had not brought serrai heads will go back to vmax.all this came about over a conversion in gun shop I was going to go heavy but some bright spark said go lighter get a flater round.stopping with vmax end of story thanks for all the conversion on subject.rubyred

It is that that a taper is a taper wether but where the taper starts it should still be the same.if you have a tube and you put two different tapered rods in it so long as they are the same dia they will touch/ogive in the same place.so why are the lengths over the two made up rounds different.thanks for looking

What I am trying to get at if both bullet heads are same dia why is it that they are giving different ogives from same base of one brass case.

Hi have seen that before.what I am trying to get at the dia of the two bullets are identical why is the ogive on the two rounds different from the base of the case.

Hi I am quite new to this reloading. I have been using 55 grain vmax some body said try 50 grain serria blitzking.I have all the stuff hornday lock load the ogive on the v Max is 1.934 with the dummy bullet and 55 grain head but when I checked the 50 grain the ogive is 1.958 with dummy bullet and 50grain head.can somebody please explain.I AM NOT CHECKING THE FULL LENGTH OF THE BULLET BUT THE OGIVE.thank you all

Hi is it lawful to head shoot geese that are doing crop damage with a 22lr as cannot get close with shotgun as they are dropping in the middle of field

Hi lads does any body a have a mec 600 junior ajustable charge bar for sale. thanks for looking

Hi what is best time of day to shoot rabbits now the night are getting longer is it first light or as it is getting dark.thanks for looking

For got to say i have fitted a doubler on this photon thanks for your reploys

Hi lads would it be ok to put my photon on 223 for foxing i have took rabbits at hundred yards with it on 22 .looking to shoot foxes at long range.thanks for looking

Can i us vectan A1 for loading 223 with 55g bullit head thanks .rubyred

Hi lads i need some advice i will be getting a 223 very shortley what is the best rifleing twist 1 in9 or somethink like a1in 12 all advice welcome i will only using it for foxing. Rubyred

Cx455 bril for money just put yukon photon on it all kited out brillient gun and scope bunnys out to hundred yard no prob bunnys donot like it thou

thanks for all your advice I did not now about the law.admin can you please remove this topic. thanks

not wanted

i was the first to say that i would buy bag of you then you sell to some one else. that is totaly wrong i was wating for your reply on payment. it is not good enought

I will take it please let me now how you want paying