Saltings
-
Posts
1,624 -
Joined
-
Last visited
Content Type
Profiles
Forums
Calendar
PW Shop
Posts posted by Saltings
-
-
maybe not the same gun but i had a 3 1/2" browning gold would only cycle 3 1/4" as built on a 3" action despite 3.5" chambered they would not eject so a 3.5" single shot strip down and remove empty any shell less than 2.3/4 70mm would not cycle eley print 70 mm on the case however 67mm or 65mm will not cycle if you want all sizes all loads buy a berretta i have the extrema 1 it shoots everything in all length up to 3.5" inc 2" roll tops every time my 10p worth a berretta semi auto is superior
-
give angel myres a call as Alan has passed away she may be able to help you out 01995 604251 Alan's wish sort the bid boys out if she can help she will if she doesn't pick up leave a message you will get a call back if all else fails pm me i may be able to help
-
1 hour ago, harrycatcat1 said:
👍 just the job
-
go get a 28 bore you will not be disappointed they shoot well if you load your own even better as anything other than 12g is expensive load your own you will enjoy the pastime making something that kills better than off the shelf my experience
-
drill a hole through and use a bolt and nut if you have room would be my get out of trouble fix or a local one man engineering firm to make you a replacement paddock at matlock are good for lr bits
-
On 03/05/2021 at 21:31, Pangolin said:
He and his dentist were livid about none whites being outside during lockdown by the sounds of it.......
troll no i didnt care i was sheilding and they were excellent in their care of me and procedures the dentists are of indian ancestery and the owner the trainee and nurse brought up the subject when i said have you been buisy through lockdown i had already canceled a broken tooth extraction it hurt like hell dew to chest infection for three weeks which the knew about and understood i dont want to come in because hence they said about the ones traveling from Leicester back to family in Coventry so they could carry on as normal what if they were asymptomatic was their worry the business had to shut down for weeks and the cost to patients and the business ( dont turn this into something its not ) the dental practice was loosing a fortune already hemorrhaging money by the day rip it out only nothing else sanitise and dont use the surgery for an hour between patients its not rocket science one positive all isolate for min two weeks the cost troll
-
On 01/05/2021 at 22:01, Mickeydredd said:
Cheers Saltings, will give that a go.
show us what you have done when your happy
-
12 hours ago, ditchman said:
scrape it all off...then get some boat varnish and cut it back by 75% ...couple of coats...as it is really thin it will soak right in...then finish off with a 50/50 mix..
im with ditchman on this you thin the varnish with turps / white spirit / substitute anything that thins oil based paints so it soaks in i always recommend this and if you wish oil finish on top will last longer and look better years later im a cabinet maker we always seal timber before colour or finish if you don't want to scrape off old paint a pressure washer can work but be care full you can destroy really fast and drying time after a heat gun and scraper for the stubborn bits keep it simple use what was around before marketing so many oils ets sunlight damp not good bleach sickens finishes are uv protected go with what ditchman recommended if you want colour add ie before final cote rustins stain apply leave 20min wipe excess off and do it again if necessary and finish you will not be disapointed or the rustic look scrape off what you can and leave the rest thats solid then do what ditchy said its rustic and will last
-
in case you change your mind and fix RECONDITIONED CYLINDER HEAD FORD RANGER MAZDA BT-50 2.5 12V WL 1998-2006 | eBay For Ford Ranger PJ PK Mazda BT50 Complete Cylinder Head WEC WLC WEAT WE | eBay HEAD GASKET BOLTS FORD RANGER EVEREST MAZDA BT50 3.0 CDVi TDCi 2006 on WEC YN | eBay or buy gaskets and bolts have your head crack tested then skinned any more than £80.00 you are being ripped off usually £45 for a skim they are not hard to work on a strip down and rebuild by home time so app a days labour
or COMPLETE CYLINDER HEAD + GASKET SET FORD RANGER MAZDA BT50 WLC 2.5 WEC 3.0 TDCi | eBay
-
On 23/04/2021 at 17:26, TIGHTCHOKE said:
Once again our beloved police are found to be lacking!
or are they lacking support up the ladder would be my bet get a uni graduate politely correct in charge woke everything is ****ed
-
i really dont want to go there (a soap box ) we are more susceptible blm etc bul**** from my experience within an area of coventry you could not keep the ****ers in their houses inc Leicester the came back to Coventry in a lockdown so they could carry on as normal my dentist was livid whites don as asked isolate 30+thousand left manchester airport in 3 month this year for a jolly back home and bring back whatever mrs told me a millionaire businessman chartered 6 flights to bring his family back to the uk before quarantine india nout on news but Boris wallpaper absolute bushtit media are they afraid to tackle this inc the videos of the stupid parting its not funny now whats in india now could be here in a few weeks as dual nationals stupid selfish ****ers
-
6 hours ago, wigeon jim said:
Hi all, garage check today they bypassed some type of water cooled valve on Side of the block and left it all day but on starting it again a 5.00 pm , it was just the same, hydrologicing they called it, even only running a few seconds there's a little pressure in the radiator, not looking good, it's a December 2009 ford ranger with 108.000 miles so don't know if it worth the repairs or just sell it as is,
hi jim if the chassis and body is good and your happy fix it or your buying someone else's problem only to spend much more money to get it right maybe even a head gasket temporary get you home fix junk if happy with truck fix it new does not mean better it costs more on electronics
-
13 hours ago, Rewulf said:
You owe me a new keyboard !
You might have been accurate if we were talking about a MK 1 or 2 escort OHV engine, but Im going to cut you some slack and bet you havent worked on cars for a while.
The more recent Rangers have cam chains, that need removing before the head comes off, injector pump ect timing up ,then the masses of ancillaries, wiring on modern engines...Its not a job for the casual mechanic.
Parts, off the top of my head would be around £350 alone, and around 10 hours labour for someone that knows what theyre doing, you could knock a bit off if its the older belted engine, but still requires special tooling and expertise.
Your £50 in parts wouldnt change the oil and filter, which it definitely needs.I would expect a bill of £1000-1500 depending on labour rates and area.
Additives like Celit work temporarily if the leak isnt bad, but often block up other areas of the water system, causing further problems.
I wouldnt use it if you are considering doing it properly and replacing the gasket later, new rads and pipes are expensive.up to 06 as said after half a day strip down etc modern day eco friendly worth less than 3k scrap im lucky i do my own work i understand engines and gearboxes despite I'm a trained cabinetmaker i can get the old mechanical stuff running even cartridge start HOWEVER modern day computer electronic problems knackered
mechanical i can fix and make it work and still know how to set points lol
-
On 24/02/2021 at 10:45, Mickeydredd said:
you can turn brass on a wood lathe no problem using a bowl scraper or grind and old screwdriver / tool steel into a smaller scraper with excellent results free hand shaping and design nout better buy stock brass bar and play offer the tool up as timber and lift hand do get desired cut rate if in doubt pm
-
could be a bad rad or pipes pressurise the system up to about 12ft lbs and watch for leaks cold check footwells for damp could be heater matrix hot water evaporates fast a sludgy rocker cap and if head gasket in doubt the temp gauge will fluctuate a test of evilbay Combustion Leak Tester Kit Head Gasket Block, 30ml Fluid 15 tests Petrol/Diesel | eBay or similar either way they are not hard to do about an hour to strip skim head an hour to put bask gaskets and stretch bolts if you search about about £50 easy to work on good luck it could be a perforated rad
-
the innocent loose in every way while solicitor win if you own nout a win win re taxman or debts if you own you are ****ed
-
he was a straight talker and a jovial sod / chap which i liked an excellent horseman while i explained to my kids at loather game fayre why he reached forward to to pull two and three reins different at the same time i explained what he was doing to create a wide swing as others did its about bending horses a true horse man / a shooting man/ a true/ wildfowler / and above all a true countryman RIP GOD REST
Quotelker
-
looking at Coventry pub 1 min past 12 desperate for a pint Coventry telegraph queuing round the city not the block barbers 6.30 am queuing open 10am 20 + deep coming home at 5.30 pm hairdressers 15+ deep Primark god help us ( put it all together ) beer new outfit hair teeth and tits a baby boom i tell you a baby boom wear a rain cote French letter durex or else there will be a price to pay
-
ok boating on the Shannon or uk canals or Norfolk broads i like to explore see whats over the hill or see from the top of the hill however good hospitality good fresh food is up there 👍 fly fishing /shooting over pointers / what rocks your boat and where
-
On 10/04/2021 at 12:35, Rewulf said:
OK , let me get this straight.
Friends daughter at Notts uni went to the park, had a good time...Then , almost immediately her best friends dad 'suddenly died of covid' at 38 years old ?
And somehow , its her fault for going to the park ?Now 'Phill' is not going to pay for her uni education anymore, and 'miss Angel' has to get a job.
And heres me thinking they had to get student loans of 10s of 1000s of pounds to pay for the course and accommodation ?
I also thought covid took a while to kill you, but obviously lifes a learning curve.
uni park jolly two days later got home learned of death phill said his bit but angel in mothers eyes its uni life he exploded for the first time in their lives after loosing his dad and other friends it went through a daughter new born baby wife and killed him on mothers side it seems the little **** got the message still at uni and she is a selfish little bitch she treats her dad like **** he pays for everything uni car insurance pocket money digs and more the lack of respect is discussing hes a plumber by trade and a good one and not a rip off merchant maby its time the little bitch gets a job so she know where money comes from i put three through uni not one asked for money they got jobs worked through summer holidays never asked but we helped them out left uni owing nothing and im a sole trader carpenter fighting cancer my daughters best friend works the covid ward at uhcw from two days admittance onward dead my daughters neighbour coth death 8mth old a month later mom who worked in the hospital crook need hospital three days later dead covid 38 yro two toddlers at home husband never seen her after ambulance took her to hospital i can only speak as i find one of my daughters boyfriends went out for a jolly ester sunday covid crook as hell last week and this we have been shielding from the start or those working within the household protecting me i have not fired a shot or cast a fly in 14 mts i have seen too much death i dont care you question me you carry on good luck hope death doesn't come to your door
-
my friend and work colleagues daughter in uni Nottingham costing a lot of £ went to the party in the park as seen on the news and others i have never heard him swear but he did that day and when she got home good friday night buzzing party party life's good at uni found her best friends dad 38 dead covid the riot act was read by phill as mrs angel could do no wrong phill out of character went apes **** other vulnerable in the house you selfish little bitch two days later after sulking she said its uni life get over it he said im not paying uni finishes get a job
-
a true country man lost RIP he had a spirit i loved and wish the youngers had Charles William to push to drive change and home grown produce game foods etc harry stay in the usa your **** caused problems how can the Merkle spin doctors spin a victim out of this one go forth and multiply with rapid jerking movements in the knowledge your grandad was a gentleman who supported the Queen and im southern irish he was a true gent RIP
-
On 04/04/2021 at 11:20, RCB56 said:
It is to take a tie bar to strengthen the C frame of the fly press.
what he said for punching holes
-
On 29/03/2021 at 09:36, oldypigeonpopper said:
Hello, have you heard of Willy Daley ?
sorry no im afraid im from brirafield cousins claregalway and oranmore and kilcolgan tuam barnadearg abbeyknockmoy athenry to mention a few music festivals / food festivals / Galway city arcetecture / history Claddagh not to mention fly fishing rivers and locks fly fishing for mackerel on the beach when on a bait run its outstanding
sample poutine illegal ( but ) if anyone wants a trot around the west coast of Ireland ask if i can help i will from Co Clair north to Donegal less commercialised good food and hospitality not to mention proper Guinness a lot to see and do if you want to explore if you want to lay on a beach go elsewhere we have excellent beaches but the water is cold
India
in Off Topic
Posted
i sympathise more affluent country's should be doing more the eu suing artra zenica despite not using stockplie in millions not used going to waste through beaurocaty could do going to a better cause and still other country's want and they would rather waste inoculations i voted leave the eu looks like i voted for the first time at 56 right leave the eu and im still happy with my choice we are leaders on our own we can thrive i have built a business from nothing ok £150 .00 so can others when they stop whining forward think needed build the future stop whining build better stop whining BUILD BETTER BUILD STRONG for god sake stop whining look what you have and make it better build build better we dont need the eu build better